Small-room ceiling solution
The compact flat form places ventilation equipment outside the occupied floor area of a laboratory or support room.
The size-10 flat cabinet is intended for small rooms where floor-mounted plant equipment is impractical. Its approximately 155 kg component package combines supply and extract air paths, counterflow recovery, filtration and fan functions above a service zone while maintaining access from below or the selected side.
The compact flat form places ventilation equipment outside the occupied floor area of a laboratory or support room.
A counterflow core transfers energy between supply and extract streams while keeping their air paths separated.
Supply and extract filter classes can be selected around outdoor-air quality and return-air protection needs.
| Nominal Airflow Class | Approximately 400 m3/h |
|---|---|
| Physical Size Class | 10 |
| Approximate Component Weight | 155 kg |
| Heat Exchanger | Counterflow plate type |
| Supply Filter | ePM1 60% class |
| Extract Filter | ePM10 60% class |
| Fan Type | Direct-drive EC fans |
| Casing Corrosion Protection | Coated cabinet suitable for indoor service |
| Mounting | Suspended low-profile ceiling arrangement |
| Customisierung | Heating, controls and connection orientation can be configured for the intended application and operating environment. |
Small laboratories, clean support rooms, preparation rooms and controlled offices where plant equipment must remain above the ceiling zone.
Water or electric heating, filter selection, sensors, fan-speed control, frost protection, duct connection orientation and remote controller are available.
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.