STjh compact 500 mm biosafety containment pass box with painted sealed body, SUS304 floor and compression handle

STJH-BIOSAFETY-CONTAINMENT-PASS-BOX-500

Biosafety Containment Pass Box 500 mm

A compact high-airtight transfer chamber for small tools and closed sample containers crossing a BSL-3 room boundary.

500 mm cubic work chamber
High-airtight sealed door hardware
Compact 60 kg enclosure

Giới thiệu Sản phẩm

This 500 mm cubic chamber is the smallest member of the biosafety containment family. A silicone door gasket, sealed handle and enclosed control box reduce leakage paths, while electromagnetic interlocking prevents both doors from opening together. Its 685 x 580 x 590 mm exterior and 60 kg body suit wall locations where transfer volume is limited and every service penetration must be controlled.

Các tính năng chính

Small-load containment

The 500 mm cube avoids oversizing the wall opening for vials, sample carriers and hand tools.

Sealed operating points

Silicone gasketing, a sealed handle and an enclosed control box address common leakage paths around the door assembly.

Transfer-status warning

The electromagnetic interlock can signal the opposite side by indicator and buzzer when a door is open.

Thông số kỹ thuật

Internal Dimensions	500 W x 500 D x 500 H mm
External Dimensions	685 W x 580 D x 590 H mm
Approximate Weight	60 kg
Electrical Supply	100 V AC, single phase, 50/60 Hz
Connected Load	Approximately 30 VA
Door Interlock	Electromagnetic interlock
Door Seal	Silicone gasket with sealed handle
Standard Construction	Baked-painted steel body and interior with SUS304 hairline floor
Control Enclosure	Sealed control box with door-status indication
Tùy chỉnh	Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Applications

Specified for small samples, sealed culture containers and compact instruments moving into or out of BSL-3 laboratories, hospital research rooms and bioprocess support areas. Buyers should confirm wall thickness, support for the 60 kg enclosure and the intended clean-to-contained transfer direction before selecting the smallest chamber.

Solutions for Your Application

A larger containment hatch would consume valuable bench and wall space for predominantly small transfers.Use the 500 mm cube to keep the opening compact while retaining high-airtight door sealing and electromagnetic interlocking.

Door hardware and control penetrations may become leakage paths at a containment boundary.Specify the silicone-gasketed doors, sealed handles and enclosed control box, then include leakage verification in the facility qualification plan.

Các tùy chọn có sẵn

Available choices include full stainless-steel construction, mounting flanges, a support stand and a germicidal lamp. Define wall build-up, load dimensions, cleaning agents and required door-status interface before final configuration.

Planning a Biosafety Containment Pass Box 500 mm specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi