STjh compact 500 mm biosafety containment pass box with painted sealed body, SUS304 floor and compression handle

STJH-BIOSAFETY-CONTAINMENT-PASS-BOX-500

Biosafety Containment Pass Box 500 mm

A compact high-airtight transfer chamber for small tools and closed sample containers crossing a BSL-3 room boundary.

500 mm cubic work chamber
High-airtight sealed door hardware
Compact 60 kg enclosure

Introdução do produto

This 500 mm cubic chamber is the smallest member of the biosafety containment family. A silicone door gasket, sealed handle and enclosed control box reduce leakage paths, while electromagnetic interlocking prevents both doors from opening together. Its 685 x 580 x 590 mm exterior and 60 kg body suit wall locations where transfer volume is limited and every service penetration must be controlled.

Características-chave

Small-load containment

The 500 mm cube avoids oversizing the wall opening for vials, sample carriers and hand tools.

Sealed operating points

Silicone gasketing, a sealed handle and an enclosed control box address common leakage paths around the door assembly.

Transfer-status warning

The electromagnetic interlock can signal the opposite side by indicator and buzzer when a door is open.

Parâmetros técnicos

Internal Dimensions	500 W x 500 D x 500 H mm
External Dimensions	685 W x 580 D x 590 H mm
Approximate Weight	60 kg
Electrical Supply	100 V AC, single phase, 50/60 Hz
Connected Load	Approximately 30 VA
Door Interlock	Electromagnetic interlock
Door Seal	Silicone gasket with sealed handle
Standard Construction	Baked-painted steel body and interior with SUS304 hairline floor
Control Enclosure	Sealed control box with door-status indication
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Applications

Specified for small samples, sealed culture containers and compact instruments moving into or out of BSL-3 laboratories, hospital research rooms and bioprocess support areas. Buyers should confirm wall thickness, support for the 60 kg enclosure and the intended clean-to-contained transfer direction before selecting the smallest chamber.

Solutions for Your Application

A larger containment hatch would consume valuable bench and wall space for predominantly small transfers.Use the 500 mm cube to keep the opening compact while retaining high-airtight door sealing and electromagnetic interlocking.

Door hardware and control penetrations may become leakage paths at a containment boundary.Specify the silicone-gasketed doors, sealed handles and enclosed control box, then include leakage verification in the facility qualification plan.

Opções disponíveis

Available choices include full stainless-steel construction, mounting flanges, a support stand and a germicidal lamp. Define wall build-up, load dimensions, cleaning agents and required door-status interface before final configuration.

Planning a Biosafety Containment Pass Box 500 mm specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe