Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Continuous edge protection
The steel enclosure protects the core around the perimeter, providing a different handling surface from separately bonded plastic edge strips on conventional mineral-core modules.
STJH-ANTISTATIC-HPL-RAISED-ACCESS-FLOOR-EC30
Antistatic HPL Raised Access Floor Encapsulated Calcium-Sulphate
A mineral-core panel with six-face steel enclosure beneath its HPL walking surface.
- Six-face galvanized-steel enclosure
- Calcium-sulphate mineral core
- HPL finish on the enclosed panel
About This Product
The EC30 configuration surrounds a calcium-sulphate core with galvanized steel before the HPL face is applied. Unlike a panel protected only by a bottom sheet and PVC edge band, the metal enclosure continues around the perimeter. The 600 mm module is intended for technical interiors where panels are repeatedly lifted and the edges face handling wear during service work.
Các tính năng chính
Protected layered assembly
The laminate is applied above the metal-enclosed panel. This makes the enclosure part of the panel construction rather than a decorative trim around the HPL alone.
Repeatable service access
Modular panels permit local opening of the floor void. Correct lifting and refitting preserve the enclosure and keep adjacent modules seated on their supporting structure.
Thông số kỹ thuật
| Panel Module | 600 x 600 mm |
|---|---|
| Nominal Thickness Range | 28–30 mm |
| Vật liệu lõi | Calcium sulphate |
| Encapsulation | Galvanized steel on six faces |
| Top Finish | HPL |
| Perimeter Construction | Metal-enclosed core edges |
| Access Type | Removable individual panel |
| Support Arrangement | Compatible pedestal and stringer system |
| Intended Setting | Dry technical interiors with repeated access |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Applications
Suitable for technical clean areas, equipment control rooms and service-intensive interiors where mineral-core flooring is preferred. Assess the supporting structure and local loads separately from the edge-protection benefit. Any service opening interrupts the enclosure and needs an appropriate finished edge and support detail before the modified panel is used.
Solutions for Your Application
Plastic perimeter strips are repeatedly damaged during access work.
Select the steel-enclosed construction and use lifting practices that avoid scraping the laminate or deforming the metal edge.
A cut-out leaves an unprotected mineral core beside equipment cabling.
Prepare the opening with a suitable lined edge and additional support where required, retaining clean service access without exposed friable material.
Các tùy chọn có sẵn
Choose HPL colour, exact panel thickness and understructure height. Plan cable apertures and removable service modules in advance so the enclosure and supporting arrangement remain appropriate for each modified location.
Planning a Antistatic HPL Raised Access Floor Encapsulated Calcium-Sulphate specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
