STjh one-row five-eighth-inch steam heating coil with closely spaced tubing and smaller headers on white.

STJH-STEAM-HEATING-COIL-1ROW-58IN

Steam Heating Coil One-Row 5/8-Inch

A thin one-row steam coil with 5/8 inch tubes and smaller headers for compact preheat and low-load clean-air sections.

One-row thin core
5/8 inch tube geometry
Selectable corrugated, ripple or flat fins

Alıntı isteği Browse ürünleri

Ürün tanıtımı

This one-row coil uses 5/8 inch tubes and smaller headers than the 1 inch model, creating a thinner and differently spaced heat-transfer face. It suits compact steam preheat and low-load clean supply-air duty where installation depth is limited.

Ana Özellikler

Compact core depth

The single 5/8 inch tube row fits a shorter AHU or duct section than a deeper two-row coil.

Closer heat-transfer pattern

Smaller tube geometry permits a different face layout for modest steam heating duty.

Fin surface selection

Corrugated, ripple or flat fins can balance heat transfer, cleanability and air resistance.

Teknik parametreler

Rows	1
Tube Outside Diameter	5/8 in
Fin Surface	Corrugated, ripple or flat
Connections	Steam supply and condensate return
Header Size	Compact relative to 1 in tube model
Heating Medium	Steam
Casing Material	Galvanized or stainless steel option
Core Duty	Compact preheat or low-load heating
Installation	Pitched toward condensate return
Customization (Özelleşme)	Face dimensions, fin pattern and connection side can be configured for the intended application and operating environment.

Applications

Compact steam preheat sections, clean supply-air trim, laboratory make-up air and low-load AHU heating.

Solutions for Your Application

The AHU has insufficient depth for a large-tube or two-row steam core.Use the thin one-row 5/8 inch geometry and verify its capacity at the actual steam pressure.

A highly enhanced fin may be difficult to clean in the selected air stream.Choose the fin surface that balances thermal area with access and expected fouling.

Mevcut Seçenekler

Fin profile, copper or aluminum fins, stainless casing, face size, steam circuit, connection side and coatings can be selected.

Planning a Steam Heating Coil One-Row 5/8-Inch specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun