STjh cleanroom RCU with separate make-up and exhaust duct collars, H14 filter and Modbus controller

STJH-CLEANROOM-RCU-MAKEUP500-1000

Cleanroom Recirculation Air Unit 500 m³/h Make-Up Air

A local H14 recirculation unit with dedicated make-up and exhaust connections for pressure control.

1000 m³/h nominal recirculation
Up to 500 m³/h make-up air
Modbus RTU communication

Alıntı isteği Browse ürünleri

Ürün tanıtımı

This RCU adds documented make-up and exhaust connections to a 1000 m³/h nominal local recirculation path. Up to 500 m³/h of make-up air can be introduced while an H14 filter protects the supply, and Modbus RTU provides control-system communication. The model is intended for positive-pressure rooms that need both local circulation and a measured fresh-air path.

Ana Özellikler

Dedicated fresh-air path

The make-up connection introduces controlled outside supply without replacing the local recirculation loop.

Pressure-balance support

Make-up and exhaust connections allow the room airflow balance to be coordinated around a pressure target.

Digital integration

Modbus RTU supports connection to a supervisory cleanroom control system.

Teknik parametreler

Nominal Recirculation Airflow	1000 m³/h
Maximum Make-Up Airflow	500 m³/h
Final Filter	H14
Communication	Modbus RTU
Air Connections	Dedicated make-up and exhaust interfaces
Operating Mode	Local recirculation with controlled fresh air
Pressure Strategy	Positive-pressure room supply
Hava akışı kontrolü	Recirculation and make-up duties balanced together
Installation	Cleanroom ceiling or technical plenum
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Applications

Recommended for positive-pressure pharmaceutical and precision-production rooms that need local filtered recirculation plus controlled fresh air. Exhaust and leakage must be included in the final mass balance.

Solutions for Your Application

Local recirculation alone cannot maintain room pressure or ventilation air.Use the make-up connection to add up to 500 m³/h while retaining the 1000 m³/h recirculation duty.

Independent fan controls can drift apart.Integrate the unit through Modbus RTU and commission recirculation, make-up and exhaust as one airflow balance.

Mevcut Seçenekler

Define make-up and exhaust connection sizes, H14 seal, Modbus addressing and access arrangement. Final flows should be set from the room pressure cascade.

Planning a Cleanroom Recirculation Air Unit 500 m³/h Make-Up Air specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun