İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Rigid backing angle
The separate support locates the facing along the junction and provides a defined attachment line before the visible cover is installed.
STJH-ALUMINUM-CLEANROOM-COVE-BASE-R50
Aluminum Cleanroom Cove Base 50 mm Two-Part
A standard-radius aluminum cove with a screw-fixed backing angle and painted facing.
- 6063 aluminum components
- 50 mm curved face
- 3000 mm straight lengths
About This Product
This two-part assembly uses a 6063 aluminum backing angle and a coved cover face. The 50 mm radius provides a balanced transition for modular room corners, while 3000 mm lengths help organize the straight runs. Polyester paint can be selected to match the surrounding panels, and dedicated corner accessories complete intersections without forcing straight profiles into an unsuitable shape.
Ana Özellikler
Panel-matched finish
A painted face can sit visually with the modular wall system while keeping the metal construction beneath the coating.
Planned corner accessories
Three-way caps and fabricated external corners support orderly termination where several cove runs meet.
Teknik parametreler
| Material Grade | Aluminum 6063 |
|---|---|
| Radius | 50 mm |
| Standard Length | 3000 mm |
| Components | Backing angle and coved facing |
| Backing Attachment | Screw fixed |
| Facing Attachment | Clip-on |
| Surface Coating | Polyester paint |
| Color | Nearest panel match |
| Corner Accessories | Three-way caps and welded external corners |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Applications
Use around pharmaceutical cleanroom panels, food-production enclosures and laboratory partitions with rigid internal junctions. Measure the complete route, including returns and three-way intersections, so that the accessory schedule follows the actual room geometry rather than relying on field-made patches.
Solutions for Your Application
Three cove runs meet with mismatched cuts and exposed gaps.
Use a dedicated three-way corner piece finished to match the straight profiles.
Long cover runs do not stay aligned with the panels.
Set the backing angles consistently before clipping on the faces, then seal both exposed contact edges.
Mevcut Seçenekler
Specify panel shade, internal and external corner quantities, end caps and straight-run dimensions. The selected coating and sealant should tolerate the cleaning products used on the surrounding wall system.
Planning a Aluminum Cleanroom Cove Base 50 mm Two-Part specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
