STJH-ALUMINUM-CLEANROOM-COVE-BASE-R50

Aluminum Cleanroom Cove Base 50 mm Two-Part

A standard-radius aluminum cove with a screw-fixed backing angle and painted facing.

6063 aluminum components
50 mm curved face
3000 mm straight lengths

견적 요청 제품 찾아보기

About This Product

This two-part assembly uses a 6063 aluminum backing angle and a coved cover face. The 50 mm radius provides a balanced transition for modular room corners, while 3000 mm lengths help organize the straight runs. Polyester paint can be selected to match the surrounding panels, and dedicated corner accessories complete intersections without forcing straight profiles into an unsuitable shape.

주요 기능

Rigid backing angle

The separate support locates the facing along the junction and provides a defined attachment line before the visible cover is installed.

Panel-matched finish

A painted face can sit visually with the modular wall system while keeping the metal construction beneath the coating.

Planned corner accessories

Three-way caps and fabricated external corners support orderly termination where several cove runs meet.

기술 매개변수

Material Grade	Aluminum 6063
Radius	50 mm
Standard Length	3000 mm
Components	Backing angle and coved facing
Backing Attachment	Screw fixed
Facing Attachment	Clip-on
Surface Coating	Polyester paint
Color	Nearest panel match
Corner Accessories	Three-way caps and welded external corners
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Use around pharmaceutical cleanroom panels, food-production enclosures and laboratory partitions with rigid internal junctions. Measure the complete route, including returns and three-way intersections, so that the accessory schedule follows the actual room geometry rather than relying on field-made patches.

Solutions for Your Application

Three cove runs meet with mismatched cuts and exposed gaps.

Use a dedicated three-way corner piece finished to match the straight profiles.

Long cover runs do not stay aligned with the panels.

Set the backing angles consistently before clipping on the faces, then seal both exposed contact edges.

사용 가능한 옵션

Specify panel shade, internal and external corner quantities, end caps and straight-run dimensions. The selected coating and sealant should tolerate the cleaning products used on the surrounding wall system.

Planning a Aluminum Cleanroom Cove Base 50 mm Two-Part specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.