Complete silica rock cleanroom sandwich panel with coated steel facings

Temiz Oda Duvar ve Tavan Sistemleri

Silika Rock Temiz Oda Sandviç Panel

A steel-faced cleanroom panel with a rigid silica-based inorganic core, offering a hard surface-supporting center, low moisture uptake and stable modular construction for hygienic walls and ceilings.

Rigid Silica Mineral Core
Low Moisture Uptake
Hard Compression-Resistant Center
Clean Steel Surface

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Silica Rock Cleanroom Sandwich Panels place a pressed inorganic core made from silica-rich mineral material and magnesium-based binders between coated steel sheets. Unlike fibrous insulation, the hard core provides continuous support beneath the outer skins and resists local compression. Its relatively low water absorption makes the material useful in controlled areas with moderate humidity. Precision edge profiles close the mineral center and create straight modular joints. The result is a solid, wipeable partition or ceiling panel suited to cleanrooms that favor inorganic construction and firm surface support.

Ana Özellikler

A pressed silica-rich core provides continuous support beneath both external steel faces.

Hard mineral structure resists localized compression better than low-density foam or paper cells.

Low moisture uptake helps maintain panel dimensions in normal humid cleanroom service.

Enclosed edges prevent mineral dust from reaching the controlled room.

Machine-formed joints align quickly and leave a narrow hygienic sealant line.

Uygulamanız için çözümler

Customers focus on mineral dust containment, core brittleness, panel mass and the protection of cut edges.

A brittle inorganic core can chip when a panel is cut carelessly on site.Factory sizing and finished cut-outs reduce uncontrolled edge damage.

Mineral dust must never enter a controlled environment through unfinished openings.Steel skins and sealed closure profiles isolate every exposed core surface.

Dense panels require more careful lifting than lightweight foam modules.Balanced lifting points and practical module lengths protect both workers and panel edges.

Surface impacts can crack an unsupported facing over a void.The continuous rigid core supports the skin across the full panel area.

Tipik uygulamalar

Pharmaceutical cleanroom wallsMedical-device production roomsLaboratory partitionsFood-processing clean areasElectronics manufacturing ceilings

Teknik parametreler

Common specifications for silica rock cleanroom panels are shown below.

Temel malzemeler	Rigid silica rock inorganic composite
Panel kalınlığı	50, 75, 100 veya 150 mm
Effective Width (Etkili Genişlik)	950 veya 1150 mm
Maksimum uzunluk	6000 mm
Çelik yüz yüze kalınlığı	0.40–0.70 mm
Core Density (Çekirdek Yoğunluğu)	80–100 kg/m³
Termal İletkenlik	Approximately 0.050 W/(m·K)
Yüzey bitirme	PE-, HDP-veya PVDF kaplı galvanizli çelik
Ortak tip	Tongue-and-groove, cam-lock or framed aluminum connection
Customization (Özelleşme)	Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir

Mevcut Seçenekler

Alternative mineral formulationPaslanmaz çelik kaplamaHandmade or machine-made edgeFactory-cut openings

Planning a Silica Rock Cleanroom Sandwich Panel specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun