İngilizce
Portekizce
İspanyolca
Malay dilinde
Endonezya dilinde
Almanca
TürkçeCurrent
Vietnamca
Fransızca
Rusça
Arapça
Taylandca
Japonca
Korece
Personel ve Malzeme Dekontaminasyon Ekipmanları
Tehlikeli Alan Pass Kutusu
A configurable sealed pass box for controlled transfer at hazardous process boundaries, without assigning a specific area classification.
- Sealed Transfer Enclosure
- Grounding Provision
- Interlocked Access Doors
- Configurable Process Interface
Ürün tanıtımı
The hazardous-area pass box is a stainless material-transfer enclosure specified around the actual substances, cleaning method, pressure scheme and electrical installation requirements of the process. It uses gasketed doors, conductive bonding points and smooth internal surfaces to support a controlled transfer route. The product name alone does not establish the electrical or protective configuration required at a given facility; that configuration is set from the actual operating environment.
Ana Özellikler
Gasketed doors and one-door-at-a-time interlocking limit direct opening between rooms.
Smooth stainless interior surfaces suit the selected cleaning practice.
Non-electrical configurations can minimise components within the transfer chamber.
Penetrations and ancillary components can be chosen for process compatibility.
Uygulamanız için çözümler
Hazardous-process transfer must be tailored to actual material, ignition-risk assessment, pressure arrangement and local installation rules.
A transfer opening creates an uncontrolled path between process rooms.Gasketed interlocked doors create a closed intermediate chamber.
Metal equipment lacks an obvious bonding connection.A dedicated grounding stud provides a defined facility connection point.
Ordinary materials degrade under the selected solvent or cleaning agent.Stainless grade, gasket and window material are selected for documented compatibility.
Users assume one generic box suits every hazardous location.The enclosure and any electrical accessories are specified only after the site’s actual area and process requirements are defined.
Tipik uygulamalar
Solvent-handling process supportPowder processing boundariesChemical laboratory material transferBattery-material handling routes
Teknik parametreler
Typical construction ranges for a hazardous-area pass box are listed below; the installed configuration must match the intended process environment.
| Temel malzemeler | SUS 304 or SUS 316L double-wall enclosure with bonding stud, gasketed doors and process-compatible internal surfaces |
|---|---|
| Panel kalınlığı | 70-120 mm sealed double-wall cabinet construction |
| Effective Width (Etkili Genişlik) | 400-1200 mm clear transfer width |
| Maksimum uzunluk | 1500 mm'ye kadar oda derinliği |
| Çelik yüz yüze kalınlığı | 1.0-1.5mm paslanmaz çelik kaplama |
| Core Density (Çekirdek Yoğunluğu) | 35-40 kg/m³ polyurethane insulation in enclosed double-wall panels |
| Termal İletkenlik | 0.022-0.028 W/(m·K) for polyurethane panel insulation |
| Yüzey bitirme | Brushed or electropolished stainless steel with chemical-compatible gaskets selected for the process |
| Ortak tip | Sealed welded or folded cabinet seams with interlocked compression-gasketed doors and bonded enclosure connection |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Sus 304 veya sus 316l muhafazaMechanical interlock without chamber electronicsGrounding braid and external bonding lugProcess-compatible gasket and window materials
Planning a Hazardous-Area Pass Box specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
