Inglês
Portuguêsatual
Espanhol
Língua malaia
Língua indonésia
Alemão
Língua turca
Vietnã
Francês
Língua russa
Língua árabe
Tailandês
Japonês
Coreano
Equipamento de descontaminação de pessoal e materiais
Caixa de passagem de área perigosa
Caixa de passagem selada e configurável para transferência controlada em limites de processos perigosos, sem atribuir uma classificação específica à área.
- Sealed Transfer Enclosure
- Grounding Provision
- Interlocked Access Doors
- Configurable Process Interface
Introdução do produto
The hazardous-area pass box is a stainless material-transfer enclosure specified around the actual substances, cleaning method, pressure scheme and electrical installation requirements of the process. It uses gasketed doors, conductive bonding points and smooth internal surfaces to support a controlled transfer route. The product name alone does not establish the electrical or protective configuration required at a given facility; that configuration is set from the actual operating environment.
Características-chave
Gasketed doors and one-door-at-a-time interlocking limit direct opening between rooms.
Smooth stainless interior surfaces suit the selected cleaning practice.
Non-electrical configurations can minimise components within the transfer chamber.
Penetrations and ancillary components can be chosen for process compatibility.
Soluções para sua aplicação
Hazardous-process transfer must be tailored to actual material, ignition-risk assessment, pressure arrangement and local installation rules.
A transfer opening creates an uncontrolled path between process rooms.Gasketed interlocked doors create a closed intermediate chamber.
Metal equipment lacks an obvious bonding connection.A dedicated grounding stud provides a defined facility connection point.
Ordinary materials degrade under the selected solvent or cleaning agent.Stainless grade, gasket and window material are selected for documented compatibility.
Users assume one generic box suits every hazardous location.The enclosure and any electrical accessories are specified only after the site’s actual area and process requirements are defined.
Aplicações típicas
Solvent-handling process supportPowder processing boundariesChemical laboratory material transferBattery-material handling routes
Parâmetros técnicos
Typical construction ranges for a hazardous-area pass box are listed below; the installed configuration must match the intended process environment.
| Material principal | SUS 304 or SUS 316L double-wall enclosure with bonding stud, gasketed doors and process-compatible internal surfaces |
|---|---|
| Painel de espessura | 70-120 mm sealed double-wall cabinet construction |
| Largura efetiva | 400-1200 mm clear transfer width |
| Comprimento máximo | Profundidade da câmara de até 1500 mm |
| Aço enfrentando espessura | 1.0-1.5mm revestimento de aço inoxidável |
| Densidade Core | 35-40 kg/m³ polyurethane insulation in enclosed double-wall panels |
| Condutividade térmica | 0.022-0.028 W/(m·K) for polyurethane panel insulation |
| Superfície acabado | Brushed or electropolished stainless steel with chemical-compatible gaskets selected for the process |
| Tipo conjunto | Sealed welded or folded cabinet seams with interlocked compression-gasketed doors and bonded enclosure connection |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
SUS 304 or SUS 316L enclosureMechanical interlock without chamber electronicsGrounding braid and external bonding lugProcess-compatible gasket and window materials
Planning a Hazardous-Area Pass Box specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
