İngilizce
Portekizce
İspanyolca
Malay dilinde
Endonezya dilinde
Almanca
TürkçeCurrent
Vietnamca
Fransızca
Rusça
Arapça
Taylandca
Japonca
Korece
Temiz Oda Kurulum Aksesuarları
Tavan Asısalı Rod
A zinc-plated threaded hanger assembly that transfers cleanroom ceiling-grid loads to an overhead structural anchor while allowing level adjustment.
- Continuous Height Adjustment
- Positive Locknut Setting
- Zinc-Plated Steel
- Clevis Grid Connection
Ürün tanıtımı
The ceiling suspension rod combines a fully threaded steel shaft with anchor hardware, locknuts and a lower clevis or channel attachment. Turning the nuts sets the suspended grid elevation, while paired locknuts retain the final position. The straight load path and accessible adjustment support accurate leveling of modular cleanroom ceilings before panels and services are installed.
Ana Özellikler
Paired nuts and washers secure the selected setting.
A pinned lower clevis accommodates common ceiling-channel interfaces.
Zinc plating provides practical corrosion resistance for concealed interior service.
Uygulamanız için çözümler
Suspended cleanroom grids require repeatable elevation control and a direct mechanical load path at every hanger point.
Uneven structural soffits make fixed-length hangers difficult to level.The fully threaded shaft provides continuous field adjustment.
Single nuts can loosen during grid handling.Paired locknuts and washers retain the selected elevation.
Rigid end details can impose side load on the grid.A pinned clevis permits limited articulation at the channel interface.
Unprotected carbon steel corrodes in humid plenums.Zinc-plated or stainless construction is selected for the operating environment.
Tipik uygulamalar
Cleanroom ceiling gridsWalkable ceiling support framesService-plenum framingModular enclosure ceilingsUtility support channels
Teknik parametreler
Typical construction ranges for an adjustable cleanroom ceiling suspension rod assembly are listed below.
| Temel malzemeler | Zinc-plated carbon-steel threaded rod with steel anchor plate, nuts and clevis |
|---|---|
| Panel kalınlığı | 40-150mm uyumlu tavan paneli kalınlığı |
| Effective Width (Etkili Genişlik) | 20-60 mm compatible ceiling-channel engagement width |
| Maksimum uzunluk | Up to 3000 mm threaded rod length |
| Çelik yüz yüze kalınlığı | 3.00-8.00 mm anchor plate and clevis component thickness |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7850 kg/m³ for carbon-steel hardware |
| Termal İletkenlik | Karbon çeliği için yaklaşık 45-60 w/(m · k) |
| Yüzey bitirme | Silver zinc-plated steel or optional passivated stainless steel |
| Ortak tip | Threaded anchor connection with locknuts and pinned clevis-to-channel attachment |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
M8, M10 or M12 threadZinc-plated or stainless steelAnchor plate or structural insertClevis or channel-nut lower fitting
Planning a Ceiling Suspension Rod specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
