ภาษาอังกฤษ
ภาษาโปรตุเกส
ภาษาสเปน
ภาษามาเลย์
ภาษาอินโดนีเซีย
ภาษาเยอรมัน
ภาษาตุรกี
ภาษาเวียดนาม
ฝรั่งเศส
ภาษารัสเซีย
ภาษาอาหรับ
ภาษาไทยปัจจุบัน
ภาษาญี่ปุ่น
ภาษาเกาหลี
อุปกรณ์ฟอกอากาศ FFU และ Terminal
ชุดกรองพัดลมตั้งพื้น
A fixed-position horizontal-air FFU on a freestanding frame for particle-sensitive work beside existing benches and equipment.
- Freestanding Support Frame
- Horizontal Filtered-Air Supply
- Leveling-Foot Base
- Local Workstation Layout
การแนะนําสินค้า
This floor-standing fan filter unit combines a fan-and-filter cabinet with a coated steel support frame. The cabinet is held above floor level, with a perforated guard in front of the filter and a separate fan chamber behind it. Leveling feet support the assembly at its installed location. The freestanding format provides a horizontal air source alongside a bench or machine without using a suspended ceiling grid to carry the unit.
คุณสมบัติที่สําคัญ
An open discharge face can be positioned beside equipment that cannot fit inside a small enclosed bench.
The floor-supported layout keeps the overhead service space available for other utilities.
The exposed front guard and surrounding frame remain accessible for routine surface cleaning.
โซลูชันสำหรับแอปพลิเคชันของคุณ
A fixed horizontal air source is most useful when its location follows the work rather than the ceiling layout.
A local assembly step sits outside the available ceiling-filter positions.Place a floor-supported module beside that step and evaluate the air path over the exposed component.
A conveyor and its service doors leave little freedom for a standard workstation.Plan the frame footprint and discharge elevation around the moving equipment and access envelope.
A small change in outlet alignment leaves part of the handling area outside the stream.Set the leveling feet and record the final position so the same geometry can be restored after maintenance.
Airflow reaching the process differs from the reading at the filter face.Assess the required work locations with normal tools, obstructions and room air currents present.
การใช้งานทั่วไป
Particle-sensitive mechanical assemblyOptical component inspectionอินเทอร์เฟซการโหลดอุปกรณ์Packaging component stagingLocal retrofit workstations
พารามิเตอร์ทางเทคนิค
Common reference selections for a fixed-position, floor-supported clean-air module.
| Equipment Configuration | Single fan-filter cabinet on a self-supporting floor frame |
|---|---|
| Reference Module-Size Options | 2 × 2 or 2 × 4 ft nominal filter-module families, approximately 610 × 610 or 610 × 1220 mm |
| ทิศทางการไหลของอากาศ | Horizontal supply from a front filter face protected by a perforated guard |
| Typical Outlet-Velocity Target | Around 0.45 m/s average at the filter face, adjustable to the working arrangement |
| Frame and Base | Coated-steel support frame with adjustable leveling feet; stainless-steel construction option |
| Filtration Choices | Replaceable inlet prefilter and downstream HEPA stage; ULPA final-filter option |
| Common Mains-Supply Versions | 120 V AC, 60 Hz, or 220–240 V AC, 50/60 Hz, single phase |
| Fan-Speed Options | Stepped AC speed selection or continuously adjustable EC motor control |
| Monitoring Options | Filter differential-pressure indication and a filter-service alarm |
| Maintenance Access | Removable filter pack and a separately accessible fan compartment |
| การปรับแต่ง | สามารถใช้ได้ตามแอปพลิเคชันที่ตั้งใจไว้และสภาพแวดล้อมการทํางาน |
ตัวเลือกที่มีอยู่
Frame footprint and outlet elevationFilter grade and replacement arrangementHousing and frame finishControl location and cable-entry layout
Choose these construction details with the supplied unit. A reverse-flow extraction configuration is a different airflow function, not an automatic feature of this positive-supply module.
Selection and Installation
Set the working envelope
Describe the exposed component, bench height, conveyor opening and handling direction. Measure the available floor footprint as well as the distance from the outlet to the operation. A larger discharge face does not automatically extend the useful clean-air zone by the same proportion.
Place the unit around the process
Keep the fan intake clear and arrange the workstation so hands, tools and large components do not block the air path upstream of the sensitive surface. Nearby doors, extraction points and supply diffusers can disturb the horizontal stream. Check airflow with the actual equipment and operator positions in place.
Compare the supplied operating configuration
Select the final-filter grade, fan and control arrangement together. Obtain delivered air volume, face-velocity distribution, available static pressure, electrical input and sound data at the same specified operating condition. Frame dimensions, weight, electrical supply and filter-removal clearance also belong in the purchase specification.
Choose fixed or movable support
Use the floor-standing version when the outlet normally serves one location. If the source must move between workstations, compare the mobile fan filter unit and its handling requirements. Secure and level the installed frame without obstructing cleaning access. This open supply arrangement does not provide hazardous-material containment or establish an ISO room classification.
การวางแผนข้อกำหนดหน่วยกรองพัดลมแบบตั้งพื้น?
ส่งมิติของคุณเงื่อนไขการติดตั้งเป้าหมายประสิทธิภาพและผิวที่ต้องการ
