Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano
Equipos de flujo laminar y contención
ZAislador aséptico de presión positivapor
A sealed product-protection isolator that maintains filtered positive pressure around sterile operations and keeps room air outside the process chamber.
- Positive Product-Protection Pressure
- Unidirectional First Air
- Closed Glove Manipulation
- Aseptic Transfer Interfaces
Introducción del producto
The positive-pressure aseptic isolator maintains the process chamber above the surrounding room pressure so leakage direction is outward after filtration. A ceiling HEPA supply creates unidirectional air over critical operations, and glove ports provide manipulation without opening the chamber. Materials move through bio-decontamination hatches, rapid transfer ports or compatible sterile connections. The design focuses on sterile product protection and is not used as a negative-pressure hazardous-material barrier unless specifically engineered for that combined risk.
Características clave
A full chamber diffuser delivers first air over open sterile product locations.
Glove access keeps operators physically separated from the aseptic zone.
Closed transfer interfaces protect supplies during ingress and finished items during egress.
Pressure-hold and glove-test connections support barrier integrity management.
Soluciones para su aplicación
Product protection depends on positive pressure, clean transfer and unobstructed first air remaining coordinated throughout operation.
Room air enters during material loading.Interlocked transfer chambers and rapid ports separate loading from the main chamber.
Equipment blocks first air over open sterile items.Diffuser sections and internal supports are arranged around the critical process locations.
A glove leak allows direct operator contact with the chamber.Replaceable glove rings and integrity-test ports support planned glove management.
A positive chamber is assumed to contain hazardous powders.The product-protection purpose and pressure direction are clearly distinguished from containment isolators.
Aplicaciones típicas
Sterile component assemblyPreparación asépticaOpen product protectionSmall-batch sterile manufacturing
Parámetros técnicos
Typical configurable construction ranges for a positive-pressure aseptic isolator are listed below.
| Materiales Core | Welded SUS316L aseptic chamber with laminated safety glass and CSM or butyl glove assemblies |
|---|---|
| Panel de espesor | 50-100 mm double-skin chamber and fan-filter sections |
| Ancho efectivo | 1200-5000 mm usable aseptic process width |
| Longitud máxima | Up to 8000 mm overall isolator length |
| Acero frente a espesor | Carcasa de cámara SUS316L de 2,0 a 3,0mm; fundas de servicio de 1,2 a 1,5mm |
| Densidad Core | Aproximadamente 8000 kg/m³ para el material de la Cámara SUS316L |
| Conductividad térmica | 14-16 W/(m · K) para acero inoxidable austenítico |
| Superficie acabada | Electropolished SUS316L with welded radiused corners and clear viewing panels |
| Tipo conjunto | Pressure-tight welded chamber with sealed glove rings, gasketed transfer doors and clamped HEPA filter frames |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Bio-descontaminación integrada de vaporPuertos de transferencia rápidaEnvironmental monitoring portsSingle- or multi-chamber configuration
Planning a Positive-Pressure Aseptic Isolator specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
