Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano
Prendas de sala limpia, EPP y consumibles
Sala limpia Hood
A white low-lint cleanroom hood with an eyes-only opening, shoulder bib and adjustable closure for controlled-environment gowning.
- Eyes-only opening limits exposed head area
- Shoulder-length bib supports garment overlap
- Bound seams and adjustable rear snaps
Introducción del producto
The Cleanroom Hood encloses the hair, ears, neck and upper shoulders while leaving a controlled opening around the eyes. Its flash-spun polyethylene shell uses bound seams and bound edges to contain raw seam surfaces, and the extended bib overlaps a compatible coverall or frock. Rear snaps allow practical fit adjustment without placing a loose tie near the work area.
Características clave
Extended front and rear bib panels tuck beneath the outer garment
Bound seam construction reinforces joins and covers cut edges
Rear snap adjustment helps control excess fabric around the head
Smooth white surface supports visual cleanliness checks
Soluciones para su aplicación
A hood must balance facial coverage, field of view and overlap with the remaining gowning system. Poor aperture sizing or a short bib can expose skin during head movement.
The face opening may shift and expose the forehead or cheek area.Specify a bound eyes-only opening with geometry matched to the intended eye protection.
A shallow bib may pull out from the coverall neckline.Use a shoulder-length bib with sufficient front and rear garment overlap.
Uncovered seam edges can become a particle-release point.Select bound seams and enclosed edge finishing throughout the hood.
Excess crown volume can interfere with goggles or head movement.Add low-profile rear snap adjustment and choose the appropriate hood size.
Aplicaciones típicas
Used in pharmaceutical and biotechnology production, medical-device assembly, aseptic support operations, controlled laboratories and clean packing areas as part of a compatible head-to-body gowning system.
Parámetros técnicos
These dimensions describe a separate cleanroom hood with a full shoulder bib. Final aperture, size and packaging configuration should match the complete gowning ensemble.
| Materiales Core | Flash-spun high-density polyethylene nonwoven |
|---|---|
| Panel de espesor | 0.12–0.22 mm |
| Ancho efectivo | 560–605 mm when laid flat |
| Longitud máxima | 470 mm |
| Acero frente a espesor | 0mm; no se utiliza revestimiento de acero |
| Densidad Core | 55–85 kg/m³ apparent material bulk density |
| Conductividad térmica | 0.035–0.055 W/(m·K), según el material |
| Superficie acabada | Smooth low-lint white surface with bound face and bottom edges |
| Tipo conjunto | Bound crown and bib seams with rear snap fit adjustment |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Medium and large fit rangesEyes-only or larger open-face apertureRear snaps or tie adjustmentSterile or non-sterile supply configurationClean-processed individual packagingDisposable polyethylene or reusable conductive polyester construction
Planning a Cleanroom Hood specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
