Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano
Drenaje de sala limpia, equipos de higiene y seguridad
Agente limpio sistema de extinción de incendios
An engineered gaseous suppression package that discharges without water or cleanup residue in critical equipment spaces.
- Residue-Free Gaseous Discharge
- Supervised Cylinder Bank
- Engineered Nozzle Network
- Integrated Releasing Controls
Introducción del producto
The clean-agent system stores the selected extinguishing medium in supervised cylinders connected to a calculated distribution network. Detection and releasing controls manage alarm verification, shutdown interfaces and discharge sequencing, while pressure switches report system operation. Cylinder capacity, nozzle orifices and room integrity requirements are engineered for the actual protected volume and hazard.
Características clave
Supervised valves and pressure contacts report system readiness.
Calculated pipe and nozzle sizing distributes agent through the protected enclosure.
Releasing controls coordinate alarms, ventilation shutdown and manual abort functions.
Soluciones para su aplicación
Critical electronics need rapid fire suppression without conductive water or persistent residue, yet discharge must remain engineered for occupant and enclosure conditions.
Water discharge can damage energized controls and clean equipment.The selected clean agent suppresses fire as a gas and leaves no particulate residue.
An undersized agent quantity fails to reach the design concentration.Cylinder capacity is calculated from protected volume, leakage and design conditions.
Open dampers allow agent to escape before hold time is achieved.The release panel coordinates ventilation shutdown and closure interfaces.
Accidental discharge disrupts production.Cross-zoned detection, manual abort and supervised circuits support controlled release logic.
Aplicaciones típicas
Cleanroom control roomsProcess equipment enclosuresElectrical switch roomsCritical data and instrumentation spaces
Parámetros técnicos
Typical cylinder-bank construction values are listed below; agent quantity, nozzle drilling and release logic remain specific to the protected hazard.
| Materiales Core | Painted steel agent cylinders with brass valves and steel or stainless distribution pipe |
|---|---|
| Panel de espesor | 2.5-6.0 mm cylinder wall depending on pressure and capacity |
| Ancho efectivo | 300-1800 mm cylinder-bank width |
| Longitud máxima | Up to 2200 mm cylinder and manifold height |
| Acero frente a espesor | 1.2-2.0 mm releasing-control enclosure panels |
| Densidad Core | 7850 kg/m³ for steel pressure-vessel parts |
| Conductividad térmica | 45-60 W/(m·K) for carbon-steel components |
| Superficie acabada | Red or white protective coating with corrosion-resistant valve hardware |
| Tipo conjunto | High-pressure threaded or flared manifold with supervised discharge valves |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Single or multi-cylinder bankMain/reserve arrangementLocal releasing panelRemote alarm and shutdown interfaces
Planning a Clean Agent Fire Suppression System specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
