English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Дренажное оборудование, оборудование для гигиены и безопасности в чистых помещениях
Система пожаротушения чистыми агентами
An engineered gaseous suppression package that discharges without water or cleanup residue in critical equipment spaces.
- Residue-Free Gaseous Discharge
- Supervised Cylinder Bank
- Engineered Nozzle Network
- Integrated Releasing Controls
Введение продукции
The clean-agent system stores the selected extinguishing medium in supervised cylinders connected to a calculated distribution network. Detection and releasing controls manage alarm verification, shutdown interfaces and discharge sequencing, while pressure switches report system operation. Cylinder capacity, nozzle orifices and room integrity requirements are engineered for the actual protected volume and hazard.
Основные характеристики
Supervised valves and pressure contacts report system readiness.
Calculated pipe and nozzle sizing distributes agent through the protected enclosure.
Releasing controls coordinate alarms, ventilation shutdown and manual abort functions.
Решения для вашего приложения
Critical electronics need rapid fire suppression without conductive water or persistent residue, yet discharge must remain engineered for occupant and enclosure conditions.
Water discharge can damage energized controls and clean equipment.The selected clean agent suppresses fire as a gas and leaves no particulate residue.
An undersized agent quantity fails to reach the design concentration.Cylinder capacity is calculated from protected volume, leakage and design conditions.
Open dampers allow agent to escape before hold time is achieved.The release panel coordinates ventilation shutdown and closure interfaces.
Accidental discharge disrupts production.Cross-zoned detection, manual abort and supervised circuits support controlled release logic.
Типичные приложения
Cleanroom control roomsProcess equipment enclosuresElectrical switch roomsCritical data and instrumentation spaces
Технические параметры
Typical cylinder-bank construction values are listed below; agent quantity, nozzle drilling and release logic remain specific to the protected hazard.
| Основной материал | Painted steel agent cylinders with brass valves and steel or stainless distribution pipe |
|---|---|
| Толщина панели | 2.5-6.0 mm cylinder wall depending on pressure and capacity |
| эффективная ширина | 300-1800 mm cylinder-bank width |
| Максимальная длина | Up to 2200 mm cylinder and manifold height |
| Толщина линий стали | 1.2-2.0 mm releasing-control enclosure panels |
| Плотность ядра | 7850 kg/m³ for steel pressure-vessel parts |
| Теплопроводимость | 45-60 W/(m·K) for carbon-steel components |
| Поверхностная отделка | Red or white protective coating with corrosion-resistant valve hardware |
| Объединенный тип | High-pressure threaded or flared manifold with supervised discharge valves |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Single or multi-cylinder bankMain/reserve arrangementLocal releasing panelRemote alarm and shutdown interfaces
Planning a Clean Agent Fire Suppression System specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
