STjh AG-1 2000 CFM nuclear HEPA filter main product view

STJH-NUCLEAR-HEPA-AG1-2000CFM

Nuclear-Grade HEPA Filter 2000 CFM AG-1 V-Bank

A 2000 cfm nuclear V-bank that doubles common 1000 cfm capacity within the standard full-size housing envelope.

2000 cfm rated airflow
24 x 24 x 11.5 inch envelope
AG-1 V-bank architecture

Введение продукции

This Size-8 configuration arranges qualified mini-pleat panels in a V-form to deliver 2000 cfm through a nominal 24 x 24 x 11.5 inch stainless enclosure. It is intended for high-flow retrofits or new banks that need greater capacity per opening, with a published comparable clean resistance near 1.3 in. w.g. The fan, rack strength and upstream flow distribution must all be checked for the higher duty.

Основные характеристики

More airflow per opening

The V-arranged media area supports 2000 cfm in a standard full-size footprint, reducing the bank face area needed for a given flow.

Retrofit-compatible dimensions

The nominal 24-inch square by 11.5-inch depth targets existing nuclear housings designed for Size-8 geometry.

Qualified high-flow pack

Microfine glass panels, continuous separators and urethane bonding form a protected nuclear-duty airflow path.

Технические параметры

AG-1 Size	Size 8
Nominal Dimensions	24 x 24 x 11.5 in
Rated Airflow	2000 cfm
Initial Resistance	About 1.3 in. w.g. at rated airflow
Minimum Efficiency	99.97% at 0.3 micron
Filter Media	AG-1 qualified microfine glass mini-pleats
Frame Material	Stainless steel
Seal Options	Gel or gasket
Maximum Continuous Temperature	121 C
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Applications

Designed for higher-capacity nuclear power, DOE or defense ventilation trains where a Size-8 cell and 2000 cfm operating point are accepted by the system design. Existing fans and housings should be reviewed for resistance, loading and clamp or gel compatibility before retrofit.

Solutions for Your Application

A 2000 cfm replacement fits physically but overloads the existing fan or creates uneven face velocity.Model the bank at about 1.3 in. w.g. clean resistance and verify approach-air distribution before changing from a lower-flow cell.

The order states Size 8 but omits the housing seal style.Identify gasket or gel interface, seal face and clamp or blade geometry so the high-flow cell does not bypass at installation.

Доступные варианты

Confirm exact external tolerances, gasket or gel seal, seal location, faceguards, airflow orientation and nuclear packaging requirements.

Planning a Nuclear-Grade HEPA Filter 2000 CFM AG-1 V-Bank specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой