English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Residual-moisture route
The hybrid binder accommodates a damp substrate condition that can prevent direct application of conventional moisture-sensitive resin coatings.
STJH-EPOXY-SELF-LEVELING-FLOORING-MT30
Epoxy Self-Leveling Flooring Moisture-Tolerant Epoxy-Cement
An epoxy-modified cementitious overlay for concrete containing residual moisture before the final resin finish is installed.
- Epoxy-modified cement rather than neat resin
- Compatible with mat-damp prepared bases
- Overcoatable mineral surface
About This Product
MT30 uses a cementitious powder with epoxy components to form a self-leveling mineral layer. The construction behaves differently from a neat epoxy wearing film: it permits water vapour movement and can bond to suitably prepared mat-damp concrete. Applied within its 1.5-3 mm range, it also provides a smoothing stage for refurbishment. A minimum 2 mm build is used when the layer performs the temporary moisture-barrier role beneath an overcoat.
Основные характеристики
Smoothing intermediate layer
The flow-applied mortar reduces shallow surface irregularities before a selected final finish establishes the required cleanroom surface.
Separate finishing stage
The overcoat can be chosen for its cleaning and chemical exposure duty without using the intermediate layer as a decorative substitute.
Технические параметры
| Chemistry | Three-part epoxy-modified cement |
|---|---|
| Layer Thickness | 1.5-3 mm |
| Moisture-Barrier Build | 2 mm minimum |
| Substrate Condition | Prepared mat-damp concrete; no standing water |
| Vapour Behaviour | Water-vapour permeable |
| Placement | Serrated trowel or drag tool |
| Deaeration | Spiked roller |
| Surface Role | Smoothing overlay and overcoatable base |
| Overcoat Type | Compatible epoxy resin finish |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Applications
Useful for on-grade cleanroom refurbishment, newly cast support floors and areas where the concrete drying schedule conflicts with finishing work. The completed room should use a compatible exposed finish when cleaning, colour or specific chemical resistance requires one.
Solutions for Your Application
A newly prepared floor remains too damp for direct neat-epoxy coating.
Introduce the specified epoxy-cement intermediate layer and respect its overcoating conditions.
The buyer expects the moisture treatment alone to deliver the final glossy room finish.
Include the chosen wearing coat in the floor package so the intermediate and exposed surfaces have distinct roles.
Доступные варианты
Select the overlay thickness for the base condition and pair it with the intended finish. Local repairs and cove transitions can be incorporated into the preparation scope without adding water to the mortar mix.
Planning a Epoxy Self-Leveling Flooring Moisture-Tolerant Epoxy-Cement specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
