STJH MT30 cured epoxy-cement flooring sample with mineral texture and a visible cut edge on white

STJH-EPOXY-SELF-LEVELING-FLOORING-MT30

Epoxy Self-Leveling Flooring Moisture-Tolerant Epoxy-Cement

An epoxy-modified cementitious overlay for concrete containing residual moisture before the final resin finish is installed.

Epoxy-modified cement rather than neat resin
Compatible with mat-damp prepared bases
Overcoatable mineral surface

Permintaan sebut harga Semak imbas produk

About This Product

MT30 uses a cementitious powder with epoxy components to form a self-leveling mineral layer. The construction behaves differently from a neat epoxy wearing film: it permits water vapour movement and can bond to suitably prepared mat-damp concrete. Applied within its 1.5-3 mm range, it also provides a smoothing stage for refurbishment. A minimum 2 mm build is used when the layer performs the temporary moisture-barrier role beneath an overcoat.

Ciri-ciri Utama

Residual-moisture route

The hybrid binder accommodates a damp substrate condition that can prevent direct application of conventional moisture-sensitive resin coatings.

Smoothing intermediate layer

The flow-applied mortar reduces shallow surface irregularities before a selected final finish establishes the required cleanroom surface.

Separate finishing stage

The overcoat can be chosen for its cleaning and chemical exposure duty without using the intermediate layer as a decorative substitute.

Parameter teknikal

Chemistry	Three-part epoxy-modified cement
Layer Thickness	1.5-3 mm
Moisture-Barrier Build	2 mm minimum
Substrate Condition	Prepared mat-damp concrete; no standing water
Vapour Behaviour	Water-vapour permeable
Placement	Serrated trowel or drag tool
Deaeration	Spiked roller
Surface Role	Smoothing overlay and overcoatable base
Overcoat Type	Compatible epoxy resin finish
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Applications

Useful for on-grade cleanroom refurbishment, newly cast support floors and areas where the concrete drying schedule conflicts with finishing work. The completed room should use a compatible exposed finish when cleaning, colour or specific chemical resistance requires one.

Solutions for Your Application

A newly prepared floor remains too damp for direct neat-epoxy coating.

Introduce the specified epoxy-cement intermediate layer and respect its overcoating conditions.

The buyer expects the moisture treatment alone to deliver the final glossy room finish.

Include the chosen wearing coat in the floor package so the intermediate and exposed surfaces have distinct roles.

Pilihan yang boleh didapati

Select the overlay thickness for the base condition and pair it with the intended finish. Local repairs and cove transitions can be incorporated into the preparation scope without adding water to the mortar mix.

Planning a Epoxy Self-Leveling Flooring Moisture-Tolerant Epoxy-Cement specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami