Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Conductive aggregate fraction
The coloured quartz includes a conductive fraction rather than ordinary decorative particles alone, making aggregate selection part of the electrical construction.
STJH-STATIC-DISSIPATIVE-EPOXY-FLOORING-DQ30
Static-Dissipative Epoxy Flooring Decorative Quartz
A quartz-broadcast resin floor combining a visible mineral mosaic with a static-dissipative binder construction.
- Decorative quartz broadcast
- Static-dissipative epoxy binder
- Sealed mosaic wearing surface
About This Product
DQ30 uses coloured quartz within a broadcast epoxy floor system to create a granular decorative appearance. The static-dissipative binder and compatible finish distinguish the construction from an ordinary decorative quartz floor. Its mineral-rich surface contrasts with the plain colour of a smooth ESD self-leveler. Aggregate distribution and the final sealing stage determine the practical appearance and contact texture.
Características-chave
Coordinated electrical finish
Binder and seal must belong to the intended static-dissipative construction; an unrelated clear coating may change the floor's behaviour.
Grout before sealing
A separate grout coat fills spaces within the broadcast course before the final seal is applied, avoiding reliance on the thin finish alone to close the aggregate bed.
Parâmetros técnicos
| Binder | Static-dissipative epoxy |
|---|---|
| Conductive Aggregate Content | Minimum 10% in the reference coloured quartz blend |
| Aggregate | Decorative coloured quartz |
| Placement | Quartz broadcast into resin |
| Surface | Sealed mineral mosaic |
| Reference Resistance Band | 1 × 10⁶ to 1 × 10⁹ Ω |
| Finish Compatibility | Static-control system sealer |
| Colour Arrangement | Blended quartz colours |
| Service Location | Interior laboratories and electronics areas |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Applications
Suitable for visible clean laboratories, electronics visitor routes and inspection areas where decorative appearance accompanies static control. The quartz blend should be chosen under the room's lighting, while cleaning tools must be able to reach the finished surface profile.
Solutions for Your Application
Quartz application displaces wet resin and leaves uneven patches.
Distribute the particles evenly so they fall lightly into the resin, maintaining a consistent broadcast across adjoining work areas.
A heavy clear seal might bury the intended profile.
Control sealing coverage to retain the specified texture and electrical contact characteristics.
Opções disponíveis
Specify the quartz blend, cove arrangement and acceptable surface texture together. Future maintenance coats should remain part of the compatible static-control system rather than being selected solely for gloss.
Planning a Static-Dissipative Epoxy Flooring Decorative Quartz specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
