STJH-NYLON-MESH-PRE-FILTER-592X592X10

Washable Nylon Mesh Pre-Filter 592 × 592 × 10 mm

An ultra-thin full-module nylon screen for washable coarse filtration where depth is extremely limited.

10 mm ultra-slim depth
3200 m3/h full-module flow
Washable black nylon mesh

Introdução do produto

This full-size 592 × 592 mm panel is only 10 mm deep, using washable black nylon mesh held by a reinforced metal perimeter. It is rated for 3200 m3/h and can be configured within the referenced G2–G4 / MERV 2–8 family according to layer count. The minimal depth suits compact air handlers and return grilles that cannot accept a conventional pleated filter.

Características-chave

Minimal projection

The 10 mm panel fits close behind return grilles and within compact equipment envelopes.

High-permeability mesh

Open nylon screening handles full-module airflow while targeting larger airborne debris.

Reinforced perimeter

A metal frame supports the thin mesh during removal, washing and reinstallation.

Parâmetros técnicos

Overall Dimensions	592 × 592 × 10 mm
Rated Airflow	3200 m3/h
Filter Media	Washable black nylon mesh
Frame Type	Reinforced metal perimeter
Efficiency Range	G2–G4 / MERV 2–8 depending on layer count
Module Format	Full 592 mm square
Service Method	Remove, wash, dry and reinstall
Filter Duty	Coarse return-air screening
Installation Depth	10 mm low-profile opening
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Applications

Suitable for cleanroom return grilles, fan-coil intakes, compact AHUs and equipment ventilation that needs reusable coarse screening in a very shallow space. Layer selection should reflect the required airflow and debris size rather than implying fine filtration.

Solutions for Your Application

A standard two-inch panel will not fit behind the return grille.The 10 mm profile provides washable screening without projecting deeply into the return plenum.

The thin mesh wrinkles during cleaning and causes edge gaps.Use the reinforced frame, wash without stretching and inspect perimeter tension before reinstalling.

Opções disponíveis

Specify layer count, finished face dimensions, frame metal, support grid and preferred access tab.

Planning a Washable Nylon Mesh Pre-Filter 592 × 592 × 10 mm specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe