STjh compact 2 foot ducted negative-pressure weighing enclosure with HEPA housing and remote exhaust collar

STJH-NEGATIVE-PRESSURE-WEIGHING-2FT-DUCTED

Negative-Pressure Weighing Booth 2 ft Ducted

A narrow externally exhausted enclosure for small-batch weighing where filtered air must leave the room.

Compact two-foot width
Remote-blower exhaust
23 or 30 inch work depth

Introdução do produto

This two-foot weighing booth captures powder close to the balance and routes the HEPA-filtered exhaust to a remote blower. The ducted arrangement keeps blower heat and noise away from the work zone while supporting facilities that prohibit room-air recirculation. Choice of 23 or 30 inch interior depth accommodates compact balances or deeper weighing equipment.

Características-chave

Externally discharged air

The exhaust connection carries filtered air out through the building system instead of returning it to the room.

Quiet working zone

Locating the blower remotely reduces motor heat and sound at the weighing position.

Depth selection

Two interior depths let the enclosure fit either a small analytical balance or deeper process equipment.

Parâmetros técnicos

Nominal Width	2 ft
Interior Depth	23 or 30 in
Airflow Mode	Negative-pressure capture
Exhaust	Ducted to remote blower
Primary Filter	HEPA
Blower	Remote, by exhaust-system design
Work Surface	Chemical-resistant or stainless steel option
Airflow Monitoring	Digital monitor option
Typical Load	Small balance and powder containers
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Applications

For small pharmaceutical, compounding and laboratory powder-weighing stations connected to a dedicated exhaust system. The remote blower and duct path should be sized for the enclosure pressure loss.

Solutions for Your Application

Recirculating filtered air is not permitted for the handled powder.Connect the booth to a remote blower so captured air is discharged through the facility exhaust path.

A full-size enclosure consumes too much bench space for a single balance.Use the two-foot body with the work depth selected around the balance footprint.

Opções disponíveis

Select 23 or 30 inch depth, work-surface material, service fittings, airflow monitor and duct transition. Remote blower duty is coordinated with the installed ductwork.

Planning a Negative-Pressure Weighing Booth 2 ft Ducted specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe