STJH-HIGH-TEMP-HEPA-H14-260C

High-Temperature HEPA Filter 260 C Separator H14

A 304 stainless H14 separator filter with silicone sealing for continuous duty up to 260 C.

260 C maximum service
304 stainless enclosure
Aluminum-separated deep pleats

Introdução do produto

The 260 C model uses a conventional deep-pleat glass-fiber pack separated by corrugated aluminum, enclosed in a 304 stainless steel frame. High-temperature silicone sealant and a silicone sponge gasket complete the hot-side assembly. It is intended for cool zones of depyrogenation tunnels and pharmaceutical ovens where 120 C construction is insufficient but 350 C ceramic hardware is unnecessary.

Características-chave

Intermediate temperature class

The 260 C limit bridges moderate warm-air V-banks and extreme-temperature ceramic-frame filters.

Metal separator stability

Corrugated aluminum separators maintain airflow passages between deep glass-fiber pleats.

Silicone hot-side sealing

High-temperature sealant and sponge gasket are selected for the thermal range of the complete element.

Parâmetros técnicos

Efficiency	H14 / 99.99% at 0.3 micron
Maximum Operating Temperature	260 C
Frame	304 stainless steel
Media	High-efficiency glass fiber
Separator	Corrugated aluminum
Sealant	High-temperature silicone
Gasket	Silicone sponge
Pack Style	Deep-pleat separator construction
Process Position	Cool zone of tunnel or pharmaceutical oven
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Applications

Specified for cool zones of depyrogenation tunnels, pharmaceutical ovens and clean hot-air systems with continuous temperatures up to 260 C. Startup and cooldown procedures should limit thermal shock, and the filter must be installed only where its entire frame and seal system remain within the rated envelope.

Solutions for Your Application

A 120 C compact filter cannot tolerate the normal oven-zone temperature.The 304 stainless separator assembly and silicone components extend continuous service to 260 C.

Rapid heating creates differential expansion and leakage at the perimeter.Use a controlled temperature ramp and provide a housing clamp that maintains even pressure on the silicone sponge gasket.

Opções disponíveis

Specify actual dimensions, airflow duty, gasket face, separator orientation and the complete heating and cooling cycle for the oven position.

Planning a High-Temperature HEPA Filter 260 C Separator H14 specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe