Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Mechanical mortar mixing
A suitable mortar mixer distributes resin, hardener, pigment and aggregate before immediate placement, helping the batch retain consistent working properties.
STJH-CHEMICAL-RESISTANT-NOVOLAC-EPOXY-FLOORING-MORTAR-6MM
Chemical-Resistant Novolac Epoxy Flooring 6 mm Mortar
A full novolac-binder mortar for demanding industrial areas where chemical exposure and mechanical abuse affect the floor body.
- Novolac binder through the mortar body
- Nominal 6 mm trowelled build
- Four-component graded-aggregate system
About This Product
MORTAR-6MM combines novolac epoxy resin, an amine curing agent, pigment and selected graded aggregate. The four-component mixture is trowelled at a nominal 6 mm, within a supported 3-6 mm application range. Unlike a conventional epoxy screed with a novolac top seal, the mortar binder itself is novolac. The construction provides a substantial mineral-resin body beneath the exposed surface.
Características-chave
Hard mineral construction
Graded aggregate and compacted placement support the floor's mechanical role in repeatedly loaded process areas.
Formed perimeter connection
An integral cove can continue the mortar finish at the floor-to-wall junction, reducing the separate trim interfaces around a process room.
Parâmetros técnicos
| Resin | Novolac epoxy |
|---|---|
| Curing Agent | Amine |
| Component Count | Four |
| Nominal Thickness | 6 mm |
| Supported Range | 3-6 mm |
| Aggregate | Selected graded mineral blend |
| Placement Method | Trowel compaction |
| Reference Shore D | 87-90 for cured reference mortar |
| Optional Surface | Compatible chemical-resistant lining |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Applications
Intended for aggressive chemical production support and heavy industrial rooms with combined spill, abrasion and impact exposure. Select the finishing arrangement for the actual chemical and cleaning conditions. Where full waterproofing is necessary, include a compatible membrane and edge details rather than assuming the mortar alone provides containment.
Solutions for Your Application
The primer dries before the mortar crew reaches the area.
Re-prime any tack-free section before continuing so that the mortar is placed onto the required tacky bond coat.
A raw mortar face may be harder to clean than the room requires.
Add the compatible lining selected for the intended chemical and hygiene duty.
Opções disponíveis
Specify pigment, cove returns and any lining or waterproofing layer. Preserve the chosen 6 mm build at loaded transitions and avoid unsupported feather edges where traffic enters the room.
Planning a Chemical-Resistant Novolac Epoxy Flooring 6 mm Mortar specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
