Sanitary diaphragm valve three-quarter view with pneumatic actuator

Sistemas de Utilidade de Cleanroom

Válvula de diafragma sanitário

A pneumatically operated 316L diaphragm valve that isolates the actuator from sterile and high-purity process media.

Actuator isolated from process media
Forged 316L hygienic body
Drainable straight-through flow path

Introdução do produto

The sanitary diaphragm valve controls high-purity media through a flexible diaphragm that seals against the body weir while separating the actuator from the wetted flow path. Its compact straight-through body, polished internal surface and configurable pneumatic actuator suit automated clean-utility and sterile-process piping.

Características-chave

316L forged or machined body

PTFE-faced or elastomer diaphragm options

Pneumatic normally closed, normally open or double-acting control

Compact straight-through weir body

Braçadeira sanitária ou conexões de extremidade de solda

Visual position indication

Orientação instalação drenável

Serviceable bonnet and diaphragm assembly

Soluções para sua aplicação

Correct valve performance depends on diaphragm compatibility, actuator sizing, installation angle and a flow path that can drain and clean as intended.

Process media reaches actuator componentsUse the diaphragm as a continuous barrier between the wetted body and actuator mechanism.

Diaphragms fail prematurelyMatch diaphragm material and closing force to temperature, pressure, chemistry and sterilization cycles.

Water remains after system drainageInstall the valve at the body-specific drain angle with correctly oriented tube runs.

Valve status is unclear to automationAdd a compatible position indicator or control head with open and closed feedback.

Aplicações típicas

Purified Water and WFI branchesSterile process transfer linesBiopharmaceutical media systemsCIP and SIP utility isolationAseptic formulation equipment

Parâmetros técnicos

Representative values vary by nominal size, body construction, diaphragm compound, connection standard and actuator function.

Material principal	316L stainless steel forged, cast or machined valve body with selected hygienic diaphragm
Painel de espessura	Valve body wall typically 3.0–12.0 mm according to nominal size
Largura efetiva	Face-to-face body width typically 80–350 mm
Comprimento máximo	Overall valve height typically up to 650 mm including actuator
Aço enfrentando espessura	Stainless actuator shell typically 1.0–2.0 mm
Densidade Core	Densidade de aço inoxidável 316L aproximadamente 8000 kg/m³
Condutividade térmica	Aço inoxidável 316L aproximadamente 15 W/(m · K) à temperatura ambiente
Superfície acabado	Mechanically polished or electropolished product-contact surface with satin external finish
Tipo conjunto	Sanitary clamp ends or orbital-weld spigots with bolted bonnet-to-body diaphragm retention
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

PTFE/EPDM or elastomer diaphragmNormally closed, normally open or double actingClamp or weld-end connectionsPosition feedback unitStroke limiterT-body and tank-outlet bodyMulti-port machined blockAlternative high-alloy body material

Planning a Sanitary Diaphragm Valve specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe