English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Утилитарные системы для чистых помещений
Диафрамный клапан для санитарии
A pneumatically operated 316L diaphragm valve that isolates the actuator from sterile and high-purity process media.
- Actuator isolated from process media
- Forged 316L hygienic body
- Drainable straight-through flow path
Введение продукции
The sanitary diaphragm valve controls high-purity media through a flexible diaphragm that seals against the body weir while separating the actuator from the wetted flow path. Its compact straight-through body, polished internal surface and configurable pneumatic actuator suit automated clean-utility and sterile-process piping.
Основные характеристики
PTFE-faced or elastomer diaphragm options
Pneumatic normally closed, normally open or double-acting control
Compact straight-through weir body
Санитарные соединения струбцины или сварк-конца
Visual position indication
Ориентация установки слива
Serviceable bonnet and diaphragm assembly
Решения для вашего приложения
Correct valve performance depends on diaphragm compatibility, actuator sizing, installation angle and a flow path that can drain and clean as intended.
Process media reaches actuator componentsUse the diaphragm as a continuous barrier between the wetted body and actuator mechanism.
Diaphragms fail prematurelyMatch diaphragm material and closing force to temperature, pressure, chemistry and sterilization cycles.
Water remains after system drainageInstall the valve at the body-specific drain angle with correctly oriented tube runs.
Valve status is unclear to automationAdd a compatible position indicator or control head with open and closed feedback.
Типичные приложения
Purified Water and WFI branchesSterile process transfer linesBiopharmaceutical media systemsCIP and SIP utility isolationAseptic formulation equipment
Технические параметры
Representative values vary by nominal size, body construction, diaphragm compound, connection standard and actuator function.
| Основной материал | 316L stainless steel forged, cast or machined valve body with selected hygienic diaphragm |
|---|---|
| Толщина панели | Valve body wall typically 3.0–12.0 mm according to nominal size |
| эффективная ширина | Face-to-face body width typically 80–350 mm |
| Максимальная длина | Overall valve height typically up to 650 mm including actuator |
| Толщина линий стали | Stainless actuator shell typically 1.0–2.0 mm |
| Плотность ядра | Плотность нержавеющей стали 316L приблизительно 8000 kg/m³ |
| Теплопроводимость | Нержавеющая сталь 316L примерно 15 Вт/(м · К) при температуре окружающей среды |
| Поверхностная отделка | Mechanically polished or electropolished product-contact surface with satin external finish |
| Объединенный тип | Sanitary clamp ends or orbital-weld spigots with bolted bonnet-to-body diaphragm retention |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
PTFE/EPDM or elastomer diaphragmNormally closed, normally open or double actingClamp or weld-end connectionsPosition feedback unitStroke limiterT-body and tank-outlet bodyMulti-port machined blockAlternative high-alloy body material
Planning a Sanitary Diaphragm Valve specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
