Inglês
Portuguêsatual
Espanhol
Língua malaia
Língua indonésia
Alemão
Língua turca
Vietnã
Francês
Língua russa
Língua árabe
Tailandês
Japonês
Coreano
Sistemas de Utilidade de Cleanroom
Gerador de vapor puro
A thermosyphon pure-steam generator that evaporates treated feed water and separates entrained droplets before delivering steam to pharmaceutical sterilization duties.
- Thermosyphon evaporation
- Low-velocity droplet separation
- Automated pressure and level control
Introdução do produto
The Pure Steam Generator uses plant steam or an electric heater to boil treated feed water in a hygienic heat exchanger. Natural circulation carries the two-phase flow into a tall evaporator/decontamination column, where low vapor velocity and vertical separation limit liquid carryover before pure steam leaves the top outlet. Feed-water level and product-steam pressure are regulated as demand changes.
Características-chave
Parallel thermosyphon bodies
Vertical decontamination column
Natural-circulation evaporation
Feed-water level transmitter
Pure-steam pressure control
Automatic blowdown interface
Integrated HMI and utility monitoring
Soluções para sua aplicação
Pure-steam production must respond to variable demand while controlling feed-water level, droplet entrainment and non-condensable gases across startup and steady operation.
Rapid demand changes disturb generator pressureModulate primary heat input from product-steam pressure and retain useful steam volume in the evaporator.
Feed-water droplets carry into the steam outletUse a tall low-velocity decontamination column and controlled thermosyphon circulation.
Unstable level exposes the heating surfaceRegulate feed-water admission continuously from the evaporator level transmitter.
Startup gases enter the clean-steam headerProvide controlled venting and warm-up logic before releasing steam to the distribution system.
Aplicações típicas
Sterilize-in-Place systemsAutoclave steam supplyAseptic process-equipment sterilizationSterile barrier steamQualified clean-utility humidification
Parâmetros técnicos
Steam output, operating pressure, heat source, exchanger area, separator size and controls are selected from peak demand and available utility conditions.
| Material principal | 316L stainless steel evaporator, secondary heat-transfer path and pure-steam piping |
|---|---|
| Painel de espessura | Evaporator shell typically 3.0–8.0 mm |
| Largura efetiva | Packaged skid width typically 1000–2200 mm |
| Comprimento máximo | Complete skid height or length typically up to 4000 mm |
| Aço enfrentando espessura | Control enclosure and skid sheet typically 1.5–3.0 mm |
| Densidade Core | Densidade de aço inoxidável 316L aproximadamente 8000 kg/m³ |
| Condutividade térmica | Aço inoxidável 316L aproximadamente 15 W/(m · K) à temperatura ambiente |
| Superfície acabado | Polished pure-steam and feed-water surfaces with satin-finished external stainless steel |
| Tipo conjunto | Orbital-welded sanitary secondary piping with hygienic clamps at instruments and service points |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Plant-steam or electric heatingVariable steam output rangeNon-condensable gas ventingPure-steam condenser interfaceAutomatic blowdownRemote utility monitoringSkid insulation and cladding
Planning a Pure Steam Generator specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
