Pure steam generator three-quarter view with evaporator and thermosyphon heat exchanger

Утилитарные системы для чистых помещений

Чистый парогенератор

A thermosyphon pure-steam generator that evaporates treated feed water and separates entrained droplets before delivering steam to pharmaceutical sterilization duties.

Thermosyphon evaporation
Low-velocity droplet separation
Автоматический контроль давления и уровня

Запрос котировки Просмотреть продукты

Введение продукции

The Pure Steam Generator uses plant steam or an electric heater to boil treated feed water in a hygienic heat exchanger. Natural circulation carries the two-phase flow into a tall evaporator/decontamination column, where low vapor velocity and vertical separation limit liquid carryover before pure steam leaves the top outlet. Feed-water level and product-steam pressure are regulated as demand changes.

Основные характеристики

316L secondary-side construction

Parallel thermosyphon bodies

Vertical decontamination column

Natural-circulation evaporation

Feed-water level transmitter

Pure-steam pressure control

Интерфейс автоматического продувки

Integrated HMI and utility monitoring

Решения для вашего приложения

Pure-steam production must respond to variable demand while controlling feed-water level, droplet entrainment and non-condensable gases across startup and steady operation.

Rapid demand changes disturb generator pressureModulate primary heat input from product-steam pressure and retain useful steam volume in the evaporator.

Feed-water droplets carry into the steam outletUse a tall low-velocity decontamination column and controlled thermosyphon circulation.

Unstable level exposes the heating surfaceRegulate feed-water admission continuously from the evaporator level transmitter.

Startup gases enter the clean-steam headerProvide controlled venting and warm-up logic before releasing steam to the distribution system.

Типичные приложения

Sterilize-in-Place systemsAutoclave steam supplyAseptic process-equipment sterilizationSterile barrier steamQualified clean-utility humidification

Технические параметры

Steam output, operating pressure, heat source, exchanger area, separator size and controls are selected from peak demand and available utility conditions.

Основной материал	316L stainless steel evaporator, secondary heat-transfer path and pure-steam piping
Толщина панели	Evaporator shell typically 3.0–8.0 mm
эффективная ширина	Packaged skid width typically 1000–2200 mm
Максимальная длина	Complete skid height or length typically up to 4000 mm
Толщина линий стали	Корпус управления и скользящий лист обычно 1,5-3,0 мм
Плотность ядра	Плотность нержавеющей стали 316L приблизительно 8000 kg/m³
Теплопроводимость	Нержавеющая сталь 316L примерно 15 Вт/(м · К) при температуре окружающей среды
Поверхностная отделка	Polished pure-steam and feed-water surfaces with satin-finished external stainless steel
Объединенный тип	Orbital-welded sanitary secondary piping with hygienic clamps at instruments and service points
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Plant-steam or electric heatingVariable steam output rangeNon-condensable gas ventingPure-steam condenser interfaceAutomatic blowdownRemote utility monitoringSkid insulation and cladding

Planning a Pure Steam Generator specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой