Inglês
Portuguêsatual
Espanhol
Língua malaia
Língua indonésia
Alemão
Língua turca
Vietnã
Francês
Língua russa
Língua árabe
Tailandês
Japonês
Coreano
Equipamento de sala limpa específico da indústria
Armadilha de luz de insetos
A wall-mounted stainless UV-A insect monitor that attracts flying insects to a concealed, replaceable adhesive capture board without an exposed high-voltage grid.
- Shielded UV-A Lamps
- Placa de captura adesiva
- Habitação inoxidável
- Tool-Free Service Panel
Introdução do produto
The insect light trap uses shielded UV-A lamps behind a louvred stainless front to attract flying insects in food handling and clean support areas. Insects are retained on a removable adhesive board rather than fragmented by an electric grid. A hinged service cover gives staff direct access to the lamps and board while the enclosed housing helps keep captured material out of view from normal working angles.
Características-chave
A full-width adhesive board retains insects intact for cleaner disposal and routine monitoring.
The hinged front opens without removing the wall-mounted backplate from service.
Superfícies externas de aço inoxidável lisas toleram limpeza frequente em áreas sensíveis à higiene.
Soluções para sua aplicação
O monitoramento de insetos voadores deve ser eficaz sem espalhar fragmentos ou criar hardware elétrico difícil de limpar perto de processos expostos.
Unidades de grade elétrica podem fragmentar insetos perto de produtos sensíveis.A concealed adhesive board captures insects intact without an exposed killing grid.
Unshielded lamps remain visible from food preparation lines.Angled stainless louvres direct UV-A output while screening the capture compartment.
Board and lamp changes can interrupt sanitation routines.A front-hinged service panel provides direct access while the backplate stays installed.
Painted or plastic housings can become damaged by repeated cleaning.A brushed stainless housing provides a smooth durable external surface.
Aplicações típicas
Food production entrances and hygiene lobbiesPackaging and ingredient preparation roomsCommercial kitchens and bakeriesPharmaceutical support and warehouse zones
Parâmetros técnicos
Common configurable construction values for a hygienic wall-mounted adhesive insect light trap are listed below.
| Material principal | 304 stainless steel housing with shatter-resistant UV-A lamps and removable adhesive board |
|---|---|
| Painel de espessura | 70-140 mm assembled housing depth |
| Largura efetiva | 450-700 mm illuminated capture width |
| Comprimento máximo | Up to 900 mm overall housing length |
| Aço enfrentando espessura | 0.8-1.2 mm brushed stainless steel casing |
| Densidade Core | 7900-8000 kg/m³ for austenitic stainless steel housing components |
| Condutividade térmica | 14-16 W/(m · K) para aço inoxidável austenítico |
| Superfície acabado | Brushed stainless exterior with smooth folded edges and removable internal capture board |
| Tipo conjunto | Hinged louvred front on a wall-mounted backplate with captive fastener and cable-entry grommet |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Two-lamp or four-lamp configuration15 W or 20 W shatter-resistant UV-A lampsWhite coated or 304 stainless housingWall, ceiling-suspended or freestanding mounting kit
Planning a Insect Light Trap specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
