Three-quarter view of the AC fan filter unit showing the external motor, blower scroll and rotary control

FFU e equipamento de purificação de ar terminal

Unidade de filtro AC Fan

A ceiling FFU built around a permanent-split-capacitor AC motor and local speed adjustment for individually balanced clean-air supply.

PSC AC Motor Configuration
Local Airflow Adjustment
Conventional Mains Supply
Replaceable Final Filter

Solicite um orçamento. Browse produtos

Introdução do produto

The AC fan filter unit uses a permanent-split-capacitor induction motor to drive a centrifugal blower above a replaceable final filter. A local rotary controller provides individual speed adjustment, and a separate terminal enclosure keeps mains connections outside the filter interface. This version is intended for installations that use direct local adjustment rather than a networked control system. The wheel type, electrical variant and filter-replacement arrangement are selected for the installation.

Características-chave

The PSC drive provides a conventional motor-and-capacitor architecture.

Local speed adjustment allows individual modules to be trimmed during airflow balancing.

A separate terminal enclosure provides a defined area for mains wiring.

The removable filter frame separates filter replacement from the motor assembly.

Soluções para sua aplicação

A locally controlled AC module suits a different operating strategy from a digitally managed FFU array.

Individual bays need different airflow settings.Use local adjustment and measure each installed module at the required operating point.

An unsuitable speed controller causes poor motor operation.Select the controller together with the PSC motor and capacitor rather than applying a general-purpose lighting dimmer or an unmatched drive.

Changed filter resistance alters the delivered airflow.Recheck the air volume during filter service and adjust within the motor/controller operating limits.

Maintenance parts are difficult to identify after installation.Record the motor, capacitor, controller and filter references with the supplied unit so replacements can be matched to the original configuration.

Aplicações típicas

Small independent cleanroomsRetrofit ceiling bays with local controlsCompounding support areasLaboratory clean benches and enclosuresFacilities standardizing on conventional AC maintenance parts

Parâmetros técnicos

Reference ceiling sizes and supply variants for a locally adjustable PSC-motor FFU.

Drive Type	Permanent-split-capacitor AC induction motor
Common Ceiling Module Formats	Nominal 600 × 600 mm and 600 × 1200 mm; imperial 2 × 2 ft and 2 × 4 ft versions
Typical Assembly Depth	Approximately 250–330 mm for conventional AC ceiling modules
Common Electrical Variants	115 V AC, 60 Hz; or 220–240 V AC, 50/60 Hz; single-phase versions
Controle de fluxo de ar	Local rotary fan-speed adjustment
Blower Arrangement	Centrifugal blower mounted above the filter plenum
Material do alojamento	Galvanized-steel plenum and service panels
Conexão elétrica	Single-phase mains connection in a separate terminal enclosure
Filtração final	Replaceable high-efficiency particulate filter
Filter Options	HEPA; ULPA configuration optional
Mounting and Sealing	Ceiling-grid flange, perimeter gasket and compression-sealed removable filter frame
Control and Service Options	Unit-mounted or wall-mounted control; bench-top or room-side filter replacement arrangement
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Electrical variant matched to the site mainsForward-curved or backward-curved blower configurationUnit-mounted or wall-mounted speed controlBench-top or room-side filter replacement

Choose the electrical and service configuration for the supplied unit; alternative variants are not interchangeable without checking compatibility.

Selection and Installation

Choose the electrical variant

Provide the site voltage, frequency and phase, the preferred controller location and the required power-connection method. The PSC motor, run capacitor and speed controller must be a compatible set. A list of possible voltages does not mean a single unit accepts every mains supply.

Compare operation at the required resistance

Request airflow, input power and sound data for the selected filter and fan setting, including the resistance used for the test. Local speed adjustment is not the same as automatic constant-airflow regulation; filter loading and upstream pressure changes can require rebalancing. If scheduled networking or automatic operating modes are needed, compare the EC fan filter unit and its actual control configuration.

Specify options before the ceiling is closed

The described version uses a locally adjusted AC drive. Select the wheel arrangement, final-filter grade, housing finish, controller position and replacement-filter route in the quotation. Confirm the module envelope, grid opening, support arrangement and clearance for the electrical box and service work. Room-side filter replacement does not imply room-side access to the motor or capacitor.

Keep service practical and safe

Locate the controller where airflow can be adjusted without disturbing the filter seal. After installation, measure the delivered air rather than using controller dial position as a flow reading. Electrical service requires isolation of the mains and safe handling of the motor capacitor by qualified personnel. After a filter change, inspect the frame seal and recheck the installed airflow. This supply module does not by itself provide biological containment, process sterilization or a room cleanliness classification.

Planning a AC Fan Filter Unit specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe