Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Doors, Windows & Interlocks / Cleanroom Electromagnetic Door Lock Recessed for Sliding Doors
zhengfeng-CLEANROOM-ELECTROMAGNETIC-DOOR-LOCK-RECESSED-SLIDING

Cleanroom Electromagnetic Door Lock Recessed for Sliding Doors

A recessed magnet meets the sliding leaf at its closing position, with the frame pocket, armature and operator sequence coordinated before fabrication.
  • Recessed body reduces exposed hardware around the opening.
  • Automatic voltage selection accommodates either supported DC supply.
  • Sealed electronics require compatible installation and cleaning.
Request a Quote Browse Products

Conceal the magnet in the sliding-door frame

The recessed lock places its body inside a prepared frame opening and presents a working face to the matching armature as the sliding leaf closes. This reduces exposed hardware around the passage. It is useful where a surface housing would interfere with the frame profile or available space.

Concealed mounting transfers complexity into the frame. Pocket depth, reinforcement, cable entry, face position and access to fasteners must be coordinated before the opening is cut. A narrow visible face does not mean the complete body fits every narrow frame.

Align the travel and closing position

The leaf must reach the intended contact position without using the magnet as a substitute for a correctly adjusted track and stop. Roller wear, lateral play and gasket resistance can affect seating. Check alignment over repeated cycles and under the normal operating conditions, not only while manually pressing the leaf into place.

Specify the mounting orientation for the selected sliding-door mechanism. Recessed pull magnets and shear locks use different engagement arrangements and are not interchangeable merely because both fit into a pocket. A shear-aligning lock needs its own preparation and adjustment.

Configuration references

ItemApplication check
DoorSingle sliding leaf with compatible frame and armature preparation
MountingRecessed body with an accessible working face
Holding reference500 lbf nominal class, to be supported by the selected model documentation
PowerAutomatic 12/24 VDC selection for the specified version
ElectronicsSealed internal assembly, with cable entries and installation exposure assessed separately
ControlSwitched DC locking power and the agreed release arrangement

The force reference is not door weight or a whole-door security rating. Pocket reinforcement, fixing strength and contact alignment remain part of the installation. Automatic voltage selection also does not make the lock tolerant of any supply: polarity, DC quality, voltage drop and total power capacity still apply.

Sealed electronics do not establish resistance to every cleanroom disinfectant, a washdown rating for the surrounding frame or airtightness of the door. Keep fluid out of unprotected connectors and use compatible cleaning methods on the exposed magnetic surfaces. If position or bond monitoring is required, identify the exact option and any changed armature or cutout dimensions before fabrication.

Release and service access

For an automatic sliding door, coordinate electrical unlocking with the operator sequence so the drive does not pull against an energised lock. Confirm the approved emergency behaviour of the complete door assembly, including any alternative opening method required for the installation. Releasing the magnet alone does not guarantee that a heavy or misaligned sliding leaf moves freely.

Acceptance should include repeated seating, release under the expected normal loading, power interruption and restoration, and each fitted monitoring output. Retain a removal path for the recessed body without dismantling unrelated cleanroom finishes. Maintenance should address track condition, closing position, contact surfaces and cable damage together.

Provide the frame and leaf sections, travel direction, available pocket and reinforcement, operator details, cable route and required signals for quotation. Keep the drawing for the exact selected lock with the door fabrication record.

Planning your Cleanroom Electromagnetic Door Lock Recessed for Sliding Doors specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us