Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Doors, Windows & Interlocks / Cleanroom Door Status Indicator LED and Audible
zhengfeng-CLEANROOM-DOOR-STATUS-INDICATOR-LED-SOUNDER

Cleanroom Door Status Indicator LED and Audible

Visual and audible cues announce a configured door condition, with trigger timing and reset provided by the compatible control sequence.
  • Audible output draws attention when users face away.
  • Steady or intermittent modes allow a distinct warning pattern.
  • Combined signals reduce the need for a separate sounder.
Request a Quote Browse Products

Add an audible cue to a defined door condition

The LED-and-buzzer station combines red-green visual indication with a local sounder. It is useful where people handling materials may face away from the door indicator. This version concentrates on signalling and has no request button; an activation switch or credential reader remains separate.

The sounder attracts attention to a condition supplied by the controller. It does not detect the door independently or determine how long an opening is acceptable. A normal transfer and a door held open too long require different treatment if nuisance alarms are to be avoided.

Define the warning trigger and reset

Decide whether the buzzer operates for an open door, an exceeded dwell time, a forced opening or another configured event. Any delay, acknowledgement or escalation must be provided by a compatible controller unless explicitly included in the selected station. Specify how the warning clears after the condition ends.

Continuous and intermittent patterns can distinguish the local warning, but they are not a substitute for a documented alarm meaning. Assess audibility at the actual work position with equipment running. The product information does not establish a universal sound-pressure level or coverage distance.

Configuration to record

ItemRequired definition
Visual displayRed-green indication with the selected steady or flashing behaviour
Sound patternContinuous or intermittent mode supported by the unit
Mode settingDocument the local jumper configuration and available linked behaviours
DC supply reference10–24 VDC for the selected configuration
AC optionConfirm the separate AC limit before selecting the supply
Trigger interfaceDefined controller output for the intended door-warning condition

Some configurations select visual and audible patterns together. Do not promise independent tone and flash programming without the applicable circuit information. Account for the combined LED and buzzer demand, and establish whether the controller provides a powered signal or a contact to be interfaced.

Commission the warning in the working area

Test the normal passage cycle first, then the intended alarm condition and its reset. Include a disconnected input or interrupted supply as appropriate to the system design. The absence of a sound should not be taken as proof that the doorway is secure when the warning circuit has lost power.

Keep the sounder opening unobstructed and use a cleaning method compatible with the housing. Inspect terminals, jumpers and the actual audible output during maintenance. This local door warning is not automatically a building fire-alarm device or a supervised emergency notification system. Where sound would disturb nearby work, consider the visual-only status indicator and define another suitable response to abnormal conditions.

Planning your Cleanroom Door Status Indicator LED and Audible specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us