Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Doors, Windows & Interlocks / Cleanroom Door Status Indicator Red-Green LED
zhengfeng-CLEANROOM-DOOR-STATUS-INDICATOR-LED-ONLY

Cleanroom Door Status Indicator Red-Green LED

A curved visual-only station displays the state supplied by the external controller, with clear meanings for red, green and loss of indication.
  • Curved housing supports a broad viewing angle.
  • Visual-only operation avoids adding local noise.
  • A simple status unit can accompany existing request devices.
Request a Quote Browse Products

Visual status where requests are made elsewhere

This red-green LED station displays the state provided by an external access or interlock controller. Its curved housing helps approaching users see the indication from the side. With no request button or buzzer, it suits quiet routes where a separate reader or switch already handles activation.

The lamp does not measure the state of the door by itself. Its usefulness depends on the signal driving it. A green light could represent permission to request, a granted release or an unlocked door, and those conditions are not interchangeable. Define one clear meaning for each display state.

Specify the meaning before the wiring

At an airlock, a lock-release command alone may be insufficient to show that passage is available. Door position, bolt or bond feedback, the other door and any process permissive can affect the decision. The external controller should generate the status that users actually need to see.

Also define the dark state. Loss of supply, broken wiring or a disabled output can extinguish both colours. An unlit station should not silently acquire the same meaning as permission to enter. Where necessary, add a clear legend or complementary indication appropriate to the site.

Station and interface schedule

ItemSelection basis
IndicationRed and green LEDs, with no local input or sounder
Viewing reference180° curved presentation, assessed from actual approach positions
DC supply reference10–24 VDC for the selected low-voltage configuration
AC supply optionUse the exact unit rating, which may have a lower upper limit than DC
Control interfaceCompatible colour-selection signals and common connection
MountingWall location with visible indication and protected cable entry

Do not assume that a generic 10–24 V AC/DC description authorises 24 VAC. Establish the electrical limits from the offered unit data. Also distinguish a powered controller output from a voltage-free contact before connection, and include all indicators in the accessory power budget.

Verify the displayed sequence

During acceptance, exercise available, busy, released and fault conditions as applicable, then interrupt the indicator supply. Check that the visible state follows the agreed logic and is readable under normal lighting from both approach directions. A broad viewing-angle reference does not specify brightness at every distance.

Keep the lens clean and inspect for loose connections or physical damage. Record the colour meanings and wiring with the controller documentation. If a local physical request is needed at the same point, compare the combined indicator and request-button station.

Planning your Cleanroom Door Status Indicator Red-Green LED specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us