EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Multiple corrosive branches require a larger common route.
The wide trunk provides the collection passage upstream of treatment equipment.
STJH-PP-CORROSION-RESISTANT-EXHAUST-DUCT-DN630
PP Corrosion-Resistant Exhaust Duct DN630 PP-H
Large PP-H trunk for centralized compatible corrosive exhaust.
- Large smooth bore suits consolidated process exhaust.
- Thick pipe rim provides a robust trunk-scale section.
Product Introduction
The 630 mm outside diameter creates a broad collection route between process areas and exhaust treatment equipment. A substantially thicker polymer wall distinguishes this trunk from small branch pipe, with welded connections forming the continuous nonmetallic system.
Key Features
- Large smooth bore suits consolidated process exhaust.
- Thick pipe rim provides a robust trunk-scale section.
Technical Parameters
| Material | PP-H |
|---|---|
| Outer Diameter | 630 mm |
| Wall Depth | 10.0 mm |
| Factory Length | 5000 mm |
| Standard Colour | RAL 7032 grey |
| Connection Process | Hot-gas welding |
| Mass per Metre | Approximately 18.8 kg/m |
| Construction | Rigid round plastic duct |
| Lining | Unlined PP-H |
| Customization | Available for the actual compatible process medium and environment. |
Applications
- Main scrubber inlet ducting
- Combined wet-process exhaust trunks
Solutions for Your Application
A branch-grade thin wall is unsuitable for a much larger pipe.
The 10 mm wall provides the selected larger pipe section with greater material depth.
Available Options
- Scrubber transition pieces
- Large welded reducers
Planning a PP Corrosion-Resistant Exhaust Duct DN630 PP-H specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
