Complete water leak detection kit with white controller and coiled white-yellow sensing cable

클린룸 제어 및 환경 모니터링 시스템 (Cleanroom Control and Environment Monitoring Systems)

물 누출 센서

A supervised leak sensor that detects conductive liquid along a cable or zone probe near cleanroom utilities and reports an alarm before water spreads.

Sensing Cable or Zone Probe
Supervised Circuit Integrity
Fast Local Alarm
BMS Relay Output

견적 요청 제품 찾아보기

상품 소개

The water leak detection sensor monitors the electrical condition of a floor cable, rope sensor or compact zone probe. Contact with conductive liquid changes the sensing circuit and activates the local controller, while supervision identifies cable breaks or disconnected probes separately. The sensing element can be routed around AHU drain pans, humidifiers, chilled-water lines and raised-floor utility paths. Relay or network output sends leak and trouble states to the BMS so response can begin before water reaches clean finishes or sensitive equipment.

주요 기능

Flexible sensing cable follows equipment perimeters and long utility routes.

Circuit supervision distinguishes a leak alarm from a broken or disconnected sensor.

Resettable sensing elements can return to service after cleaning and drying.

Separate relay or network states report leak, cable fault and controller health.

응용 프로그램 솔루션

A useful leak system must cover the likely water path, remain serviceable and signal cable damage before an actual leak occurs.

A point probe detects water only after it reaches one small location.A sensing cable follows the full perimeter or lowest likely flow path.

A disconnected cable leaves the area unprotected without warning.Supervised end-of-line monitoring creates a distinct trouble alarm for circuit loss.

The sensor must be discarded after a minor clean-water leak.A resettable cable can be wiped, dried and returned to monitoring service.

Water spreads under equipment before staff find the source zone.Zoned circuits and clear controller labels narrow the response area quickly.

일반적인 응용 프로그램

AHU and humidifier roomsCleanroom utility chasesRaised-floor process areasChilled-water and drain lines

기술 매개변수

Typical construction values for a cleanroom water leak sensor and zone controller are listed below.

핵심 재료	Conductive polymer sensing cable with fluoropolymer braid and polycarbonate zone controller
패널 두께	35-70 mm controller depth
유효 폭	90-160 mm controller width
최대 길이	Sensing cable zones up to 30000 mm
강철 면면 두께	0-1.0mm; 선택적인 스테인리스 장착 판
코어 밀도	1700-2200 kg/m³ for fluoropolymer sensing-cable materials
열전도도 (Thermal Conductivity)	0.20-0.30 W/(m·K) for fluoropolymer cable insulation
표면 마무리	White controller with blue status labels and white-yellow braided sensing cable
접합 유형	Supervised quick-connect sensing cable with end terminator and removable alarm terminals
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Zone cable or point probeMultiple sensing zonesLeak and trouble relaysModbus or BACnet gateway

Planning a Water Leak Sensor specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.