클린룸 배수, 위생 및 안전 장비

Wall - Mounted Eyewash

A compact wall-supported twin-nozzle eyewash that preserves floor clearance while providing immediate hands-free flushing.

Space-Saving Wall Mount
Twin Protected Nozzles
Stay-Open Push Control
Stainless Receptor Option

견적 요청 제품 찾아보기

상품 소개

The wall-mounted eyewash places the receptor, twin flushing heads and activation valve on a rigid bracket, leaving the floor beneath clear for cleaning and circulation. A large push flag opens a stay-open valve, while flow controls and an inlet strainer stabilize the two streams. Supply and waste connections can pass directly through the wall or remain accessible beneath the receptor according to the service layout.

주요 기능

Wall support keeps the emergency station off the floor and reduces its installed footprint.

Twin covered heads deliver simultaneous controlled flushing streams.

A stay-open valve leaves both hands free after one-motion activation.

Stainless and chemical-resistant receptor options suit different cleaning chemistries.

응용 프로그램 솔루션

Small laboratories need an unobstructed emergency flush point without sacrificing activation clarity or service access.

A pedestal unit obstructs narrow aisles and complicates floor cleaning.The load-bearing wall bracket keeps the complete eyewash above the floor.

Emergency users need to operate the station while vision is impaired.A large safety-colored push flag provides a simple tactile activation point.

Water pressure variation can make one nozzle stream stronger than the other.Matched flow controls regulate both heads from the common filtered inlet.

Visible piping can conflict with a clean wall finish.Rear-entry supply and waste routing can conceal services within the technical wall zone.

일반적인 응용 프로그램

Cleanroom laboratoriesChemical sampling roomsResearch wet benchesCompact utility alcoves

기술 매개변수

Typical dimensions and materials for a wall-mounted plumbed eyewash are listed below; final wall reinforcement and emergency-water supply are coordinated with the room services.

핵심 재료	304 stainless receptor and bracket with chrome-plated brass valve components
패널 두께	1.0-1.5 mm stainless receptor
유효 폭	280-400 mm
최대 길이	Up to 500 mm projection from wall
강철 면면 두께	1.0-2.0 mm stainless bowl and mounting bracket
코어 밀도	7900-8000 kg/m³ for stainless structural parts
열전도도 (Thermal Conductivity)	스테인리스 구성품의 14-16 W/(m·K)
표면 마무리	Bright or satin stainless with safety-green activation components
접합 유형	Bolted wall bracket with threaded inlet, waste and stay-open valve connections
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Rear or bottom service entryStainless or polymer receptorFlow-switch alarm contactTempered-water mixing assembly

Planning a Wall-Mounted Eyewash specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.