STjh large 1000 mm VHP pass box with oversized 316 stainless chamber, H14 housing and twin lower service bays

STJH-VHP-PASS-BOX-1000

VHP Pass Box 1000 mm

A large VHP treatment chamber for bulky tooling, grouped containers and high-volume aseptic transfer loads.

1000 mm cubic load chamber
316 stainless process interior
H14-filtered ISO 5 environment

견적 요청 제품 찾아보기

상품 소개

The 1000 mm model provides the family's largest published cubic chamber, measuring 1000 x 1000 x 1000 mm internally and 1600 x 1060 x 2200 mm externally. Its 316 stainless work zone and H14 filtration support an ISO 5 chamber environment for thermolabile production loads. The larger volume increases load flexibility but also makes distribution, conditioning and aeration studies more important than with the smaller models.

주요 기능

Maximum family load envelope

The one-metre cube accommodates bulky production tooling and grouped containers that would otherwise require repeated small cycles.

Clean process enclosure

A 316 stainless chamber and H14 filtration support controlled transfer into higher-grade areas.

Large-load process control

The cabinet provides space for circulation and monitoring hardware needed to develop recipes for demanding load patterns.

기술 매개변수

Internal Chamber	1000 x 1000 x 1000 mm
External Dimensions	1600 x 1060 x 2200 mm
Chamber Material	316 stainless steel
Final Filter	H14
Chamber Cleanliness	ISO 5 source-family configuration
Source-Family Cycle Time	90–150 min
Process Stages	Conditioning, VHP exposure and aeration
Load Type	Bulky tooling and grouped containers
Installation	Large integrated wall transfer system
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

For large production tools, container sets and grouped aseptic supplies entering pharmaceutical and biotechnology processing suites. The chamber should be loaded with defined circulation paths; filling the cube to its dimensional limit can prevent uniform vapor contact and delay aeration.

Solutions for Your Application

Bulky thermolabile equipment cannot enter the smaller VHP chambers without disassembly.Use the 1000 mm cube after verifying the complete equipment envelope, support method and door clearance.

A large dense load may create slow-conditioning zones and extended peroxide desorption.Map the worst-case loaded chamber and establish recipe limits for mass, spacing and material absorption.

사용 가능한 옵션

Configure loading racks, VHP generator connection, concentration sensors, cycle data capture, door handing and emergency aeration. Final treatment capacity is governed by validated load mass and geometry, not chamber volume alone.

Planning a VHP Pass Box 1000 mm specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.