Separate controls make the transfer cycle difficult to follow.
The display presents door and connected-equipment states together.
This system separates a wall-mounted control unit from a flush stainless display module. A 32-bit microcontroller coordinates three transfer doors and provides outputs for pass-box lighting, ultraviolet equipment and a blower. The display uses a two-line character screen with status LEDs. Static and dynamic configurations are available, with pressure monitoring reserved for the dynamic version. The system hardware is supplied for integration with a transfer chamber rather than as the chamber itself.
| Door Capacity | 3 doors |
|---|---|
| Processor | 32-bit microcontroller |
| Display | 16 x 2 alphanumeric with LEDs |
| Mains Input | 110–230 VAC, 50 Hz, single phase |
| Lock Output | 12 VDC, 500 mA per lock |
| Equipment Contacts | Potential-free changeover, 5 A at 230 VAC |
| Display Face | 304 stainless steel |
| Display Mounting | Flush mounted |
| Communication Option | Modbus RTU |
| 사용자 정의 | Static or dynamic equipment connections can suit the intended pass-box application. |
The display presents door and connected-equipment states together.
The integrated hour counter supports tracking of UV lamp use.
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.