STjh terminal U15 ULPA filter with gel seal main view

STJH-TERMINAL-ULPA-U15-GEL

Terminal ULPA Filter U15 Gel-Seal

A U15 terminal panel with a self-healing fluid gel interface for compatible room-side bottom-load housings.

Self-healing fluid gel
U15 terminal grade
71-104 mm depth choices

견적 요청 제품 찾아보기

상품 소개

The gel-seal U15 terminal is intended for housings whose perimeter blade enters a factory-filled fluid gasket. Compared with the dry-gasket model, it avoids dependence on wide face compression and provides a seal that can recover around the blade. Frame depths in the 71, 80 or 104 mm family allow buyers to align the panel with existing bottom-load hardware and available ceiling space.

주요 기능

Fluid perimeter engagement

The mating blade enters the gel continuously around the frame, creating a positive interface in compatible terminals.

Room-side maintenance

Bottom-load access allows replacement below the ceiling without entering the technical plenum when the housing is designed accordingly.

Shallow frame selection

The 71, 80 and 104 mm depth family supports several terminal geometries without using a deep cassette.

기술 매개변수

Efficiency Class	U15
Minimum Efficiency	99.9995% at MPPS
Media Configuration	High-efficiency mini-pleat
Frame Material	Anodized aluminum
Frame Depth Options	71, 80 or 104 mm
Seal Type	Self-healing fluid gel gasket
Mating Interface	Housing knife edge
Loading Method	Room-side bottom load
Primary Position	Cleanroom terminal ceiling
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Used in semiconductor cleanrooms and precision production areas whose terminal housings are designed for room-side gel-seal replacement. U15 is appropriate when the particle-risk assessment does not require the lower penetration of U16.

Solutions for Your Application

The gel trough lines up poorly with the housing blade after the retaining clips close.Check trough offset, blade reach and frame depth against the terminal section, then seat the panel evenly before locking it.

Gel adheres to packaging or collects debris before installation.Keep the protective cover in place until the terminal is ready and inspect the entire trough before raising the filter.

사용 가능한 옵션

Choose exact face and frame depth, gel formulation and location, media type, guards, retention hardware and airflow direction.

Planning a Terminal ULPA Filter U15 Gel-Seal specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.