STJH paired 304 stainless movement-joint rails with dark replaceable TPE center and complete anchoring legs on white

STJH-STAINLESS-STEEL-CLEANROOM-FLOOR-MOVEMENT-JOINT-TPE-INSERT-304

Stainless Steel Cleanroom Floor Movement Joint 304 with Replaceable TPE Insert

Paired stainless rails surround a replaceable flexible center for movement and edge protection.

AISI 304 side profiles
Replaceable flexible center
Perforated anchoring legs

견적 요청 제품 찾아보기

About This Product

This joint combines two AISI 304 anchoring profiles with a soft thermoplastic-elastomer center. The metal sections protect the adjoining floor edges while the insert accommodates movement between them. For the replaceable-insert configuration, the selected profile heights start at 8 mm; the very shallow coating sections use a different detail and are not presented as interchangeable replacement-insert versions.

주요 기능

Serviceable center strip

A damaged insert can be addressed separately from the metal rails when the selected section supports replacement.

Separated edge support

Each floor edge has its own anchoring profile, allowing the soft zone to remain functional between the supported sides.

Reduced rigid bridging

The flexible center interrupts a continuous rigid connection across the joint and can help limit impact-sound transfer.

기술 매개변수

Rail Material	AISI 304 stainless steel
Flexible Material	Thermoplastic elastomer
Selected Movement Zone	11 mm
Replaceable-Series Heights	8-30 mm
Standard Length	2, 500 mm
Anchoring Legs	Trapezoid perforated
Center Service	Replaceable insert
Floor Interface	Thin-bed tile or natural stone
Edge Position	Flush with or slightly below covering
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Suitable for consideration along movement lines in tiled clean corridors, industrial support rooms and hard-floor trolley routes. The profile must align with the joint beneath it; moving the surface strip away from the substrate joint would leave the floor unable to follow the intended movement path.

Solutions for Your Application

A damaged center strip requires extensive floor demolition.

Use the replaceable-insert section and retain access to the flexible zone for later maintenance.

Mortar fills the movement zone during installation.

Keep the center clear while fully embedding the anchoring legs so that edge support does not lock the joint.

사용 가능한 옵션

Select profile height, insert color and junction pieces. Include wheel type and cleaning exposure in the inquiry, and use compatible intersections where several movement lines meet.

Planning a Stainless Steel Cleanroom Floor Movement Joint 304 with Replaceable TPE Insert specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.