클린룸 장비 및 무균 시설 필수품의 원스톱 공급업체국제 프로젝트 지원
Open mobile navigationClose mobile navigation
/ 제품 / Cleanroom Air Filters / Photocatalytic Oxidation Filter Module 28 W 4300 m3/h
STJH-PCO-MODULE-28W-4300

Photocatalytic Oxidation Filter Module 28 W 4300 m3/h

The longest and highest-airflow PCO configuration in the series for full-size air-conditioning ducts.
  • Up to 4300 m3/h
  • 565 mm treatment section
  • 28 W high-flow configuration
견적 요청 제품 찾아보기

상품 소개

The 28 W configuration combines a 565 mm active section with the family maximum airflow of 4300 m3/h. It is intended for larger ducts where the shorter modules would require parallel installation, and its increased treatment length provides more photocatalytic surface in the airstream. The module retains the airflow sensor, lamp-life display and alarm connections used throughout the family. Performance must be evaluated against pollutant identity and residence time, not assumed from electrical power alone.

주요 기능

Maximum family throughput

One module serves up to 4300 m3/h when installed within its documented duct conditions.

Extended catalyst exposure

The longest active section carries a greater illuminated TiO2 area than the two smaller versions.

Operational feedback

Integrated airflow and lamp-life supervision helps distinguish an energized system from an effective operating module.

기술 매개변수

Electrical Power28 W
Supply220-240 V, 50/60 Hz
Rated Current0.16 A
Overall Dimensions250 x 157 x 637 mm
Treatment Section Length565 mm
Maximum Airflow4300 m3/h
Ingress ProtectionIP20
Treatment MethodUV-C activated TiO2 photocatalysis
ControlsAirflow sensor, lamp-life display, alarm and control ports
사용자 정의의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

For large commercial AHUs, cleanroom support ventilation and high-volume recirculation ducts needing a monitored photocatalytic stage for selected organic pollutants.

Solutions for Your Application

The long module conflicts with coils, dampers or access doors in the air handler.Coordinate the 637 mm overall envelope and lamp withdrawal path before cutting the mounting opening.
The system expects PCO to replace particulate or molecular filtration for every contaminant.Use upstream particle filtration and retain contaminant-specific adsorption where compounds are not suited to photocatalytic treatment.

사용 가능한 옵션

Confirm airflow, duct dimensions, pollutant mix, electrical controls, access clearance, prefiltration and monitoring requirements.

Planning a Photocatalytic Oxidation Filter Module 28 W 4300 m3/h specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.
저희에게 이메일 whatsapp WeChat

제품

뉴스

회사 소개

문의하기