STjh 610 mm hydrophobic H14 HEPA filter with gel seal main view

STJH-HYDROPHOBIC-HEPA-H14-GEL610

Hydrophobic HEPA Filter 610 mm H14 Gel-Seal

A 610 mm hydrophobic H14 membrane panel with a fluid gel seal for humid room-side terminals.

Hydrophobic H14 media
Integral gel trough
Humid bottom-load service

견적 요청 제품 찾아보기

상품 소개

The gel-seal hydrophobic model combines a full-module ePTFE pack with a continuous gel channel in the aluminum frame. It is intended for humid cleanroom terminals where a housing knife edge enters the replaceable filter's gel from above. This fluid interface differentiates it from the dry-gasket 610 x 610 mm version and requires inspection of both gel condition and knife-edge cleanliness.

주요 기능

Moisture and seal combination

Hydrophobic membrane media is paired with a conformable fluid perimeter for sanitation-intensive environments.

Room-side replaceability

A compatible bottom-load housing lets technicians change the filter without relying on access above the ceiling.

Visible seal engagement

The continuous knife-edge impression in the gel assists inspection after a filter is removed.

기술 매개변수

Nominal Face Format	About 610 x 610 mm
HEPA Classification	H14 / at least 99.995% at MPPS
Media Type	Hydrophobic supported ePTFE
Frame Material	Anodized aluminum
Seal	Integral gel channel
Housing Interface	Terminal-mounted knife edge
Humidity Use	High-humidity cleanroom service
Replacement Direction	Bottom-load or room-side
Inspection Point	Gel continuity and knife-edge track
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Used in high-humidity pharmaceutical and biotechnology ceilings that combine sanitation exposure with room-side filter replacement. It is appropriate only where the terminal has a mating knife edge positioned for the filter-mounted gel channel.

Solutions for Your Application

A dry gasket loses reliable contact after repeated wet sanitation around the terminal face.The integral gel channel provides a conformable fluid seal when engaged by the housing knife edge.

Condensate or cleaning residue contaminates the gel trough during service.Protect the open channel during handling and install only after the receiver and surrounding surfaces are clean and dry.

사용 가능한 옵션

Confirm gel chemistry, face dimensions, channel location, room-side clamps and compatibility with the site's sanitation chemicals.

Planning a Hydrophobic HEPA Filter 610 mm H14 Gel-Seal specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.