STjh U17 ePTFE ULPA filter panel main product view

STJH-EPTFE-ULPA-U17

ePTFE Membrane ULPA Filter U17

The highest-efficiency supported ePTFE option for critical tools where U17 protection outweighs added fan resistance.

U17 MPPS acceptance
Boron-free ePTFE media
Gasket, gel or blade frames

견적 요청 제품 찾아보기

상품 소개

This U17 ePTFE model is specified for the narrow set of process tools and mini-environments that require the series' lowest particle penetration. It retains boron-free supported membrane construction but carries the higher nominal resistance of 0.55 in. w.g. at 100 fpm. The broad seal menu is useful for retrofits, provided the selected aluminum frame matches the tool's actual mating surface.

주요 기능

Highest membrane efficiency

U17 acceptance addresses exceptionally sensitive tool environments that cannot use the lower U15 or U16 tier.

Seal-system adaptability

The media pack can be paired with dry compression, fluid gel or knife-edge interfaces for varied OEM equipment.

Defined airflow tradeoff

The 0.55 in. w.g. reference reveals the fan-pressure consequence before the highest grade is adopted.

기술 매개변수

Efficiency Class	U17
Minimum Efficiency	99.999995% at MPPS
Media Type	ePTFE membrane supported by spunbond scrim
Elemental Profile	Boron-free filter media
Media Pack Depth	35 mm
Nominal Initial Resistance	0.55 in. w.g. at 100 fpm
Frame Material	Anodized extruded aluminum
Media-to-Frame Sealant	Solid polyurethane
Seal Options	Gasket, reverse gel or knife edge
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Intended for the most contamination-sensitive semiconductor process tools, critical mini-environments and advanced metrology zones. It should be deployed selectively, with fan capacity, filter-test flow and the OEM seal interface confirmed before purchase.

Solutions for Your Application

The highest efficiency is chosen as a default even though it erodes tool airflow margin.Reserve U17 for documented critical points and compare its 0.55 in. w.g. clean drop with the tool fan curve.

An OEM tool uses a nonstandard face dimension or divider arrangement.Provide the approved interface drawing, net face area and divider or test-port layout instead of ordering a nominal panel size.

사용 가능한 옵션

State special face size, frame depth, seal type and side, faceguard alloy, divider orientation and test-port count.

Planning a ePTFE Membrane ULPA Filter U17 specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.