STjh H14 ePTFE HEPA filter with knife-edge frame main view

STJH-EPTFE-HEPA-H14-KNIFE

ePTFE Membrane HEPA Filter H14 Knife-Edge

An H14 ePTFE panel with a frame-mounted knife edge for open-plenum gel-grid ceilings.

Frame-mounted knife edge
Low-outgassing ePTFE
Open-plenum gel-grid use

견적 요청 제품 찾아보기

상품 소개

This version forms the knife edge directly into the anodized aluminum filter frame, pairing it with supported hydrophobic ePTFE media. The rigid blade enters gel retained by an open-plenum ceiling grid, so the replaceable panel carries no gasket or filled trough. Its low-outgassing membrane construction suits microelectronic and other sensitive mini-environments where both seal geometry and material emissions matter.

주요 기능

Filter-side sealing blade

The continuous aluminum edge gives a defined interface with gel retained in the ceiling support grid.

Sensitive-process material choice

Low-outgassing membrane and frame materials help reduce avoidable molecular contribution near critical equipment.

No filter-mounted gel

Gel remains in the grid, simplifying the replaceable element while shifting inspection to the ceiling receiver.

기술 매개변수

Efficiency Class	H14 / at least 99.995% at MPPS
Membrane Media	Supported hydrophobic ePTFE
Frame Material	Anodized aluminum
Seal Interface	Integral knife edge
Gel Location	Ceiling-grid receiver
Material Emission	Low-outgassing construction
Pleat Type	Separatorless membrane mini-pleat
Installation	Common-plenum grid or mini-environment
Alignment Control	Match blade centerline and immersion depth to gel trough
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Appropriate for common-plenum semiconductor cleanrooms, mini-environment ceilings and sensitive production zones using gel-filled grid receivers. The blade location, gel depth and frame tolerance must be coordinated before purchase because this filter cannot seal against a flat gasket land.

Solutions for Your Application

Organic emissions from final-filter components can affect a sensitive microelectronic process.The low-outgassing ePTFE construction limits avoidable material contribution while maintaining H14 particulate filtration.

The knife edge lands beside rather than inside the ceiling gel channel.Verify the blade offset against the actual grid section and trial-fit a dimensioned sample before batch supply.

사용 가능한 옵션

Define blade offset, frame depth, face dimensions, grille arrangement and low-outgassing material requirements for the grid.

Planning a ePTFE Membrane HEPA Filter H14 Knife-Edge specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.