STjh H14 ePTFE HEPA filter with gasket seal main view

STJH-EPTFE-HEPA-H14-GASKET

ePTFE Membrane HEPA Filter H14 Gasket-Seal

A supported H14 ePTFE panel with a seamless PU gasket for clamped life-science terminals.

Supported ePTFE membrane
H14 MPPS grade
Continuous PU compression seal

견적 요청 제품 찾아보기

상품 소개

This model combines a hydrophobic supported ePTFE membrane with an anodized aluminum frame and continuous polyurethane gasket. The media is designed for greater mechanical strength, low outgassing and compatibility with oil-based PAO challenge procedures. Choose the dry-gasket configuration for terminals that compress the filter against a flat land rather than using a fluid receiver.

주요 기능

PAO-oriented membrane performance

The media is suitable for controlled oil-aerosol integrity testing without the premature loading associated with some membrane types.

Chemically resilient pack

The membrane construction tolerates common life-science cleaning and decontamination agents when material compatibility is confirmed.

Simple dry-seat interface

The poured gasket works with familiar clamped terminal frames and avoids gel maintenance.

기술 매개변수

Efficiency	H14 / at least 99.995% at MPPS
Media	Supported hydrophobic ePTFE membrane
Frame	Anodized aluminum
Gasket	Continuous polyurethane foam
Seal Method	Face compression against flat housing land
Media Properties	Hydrophobic, mechanically robust and low outgassing
Challenge Aerosol	Suitable for PAO under the selected test procedure
Cleaning Exposure	Resistant to common life-science cleaning agents
Typical Mounting	Clamped cleanroom terminal or LAF bench
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Used in life-science cleanrooms, laminar-airflow benches and critical terminals that specify H14 membrane media and a conventional gasket seat. The filter supports selection for handling robustness and integrity testing, but the installed seal remains dependent on correct compression and a clean housing land.

Solutions for Your Application

Membrane damage during installation causes a failed room-side integrity test.The supported ePTFE pack improves handling resilience; installers should still grip only the frame and protect the media face.

The gasket is compressed unevenly by a warped terminal clamp.Inspect the sealing land and tighten opposing clamps progressively before the PAO integrity test.

사용 가능한 옵션

Specify exact size, gasket face and material, media-pack depth, protective grid and site integrity-test method.

Planning a ePTFE Membrane HEPA Filter H14 Gasket-Seal specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.