STJH QF30 quartz-filled epoxy floor sample showing a smooth top and dense aggregate cross-section on white

STJH-EPOXY-SELF-LEVELING-FLOORING-QF30

Epoxy Self-Leveling Flooring 3 mm Quartz-Filled

A mineral-filled epoxy overlay offering a deeper wearing body for repeatedly used clean industrial routes.

3 mm nominal selection
Graded aggregate within a total-solids epoxy body
Smooth finish without loose surface grit

견적 요청 제품 찾아보기

About This Product

QF30 is the nominal 3 mm selection within a 2-4 mm self-smoothing epoxy construction. A separate graded filler component is blended into the resin to create a dense aggregate-rich body, with pigment distributed through the mix. The cured face remains smooth rather than exposing a broadcast texture. This configuration is suited to repetitive trolley paths where a thin sealing film would provide little material above the slab.

주요 기능

Substantial mineral body

The filler-bearing layer provides additional wearing depth while retaining a level, resin-rich surface for routine machine cleaning.

Measured material placement

Application by gauge-controlled spreading helps maintain the chosen depth across aisles, avoiding thin patches at local high points.

Low-porosity construction

A dense cured matrix limits liquid entry into the overlay; joints and perimeter terminations remain separate details in the floor design.

기술 매개변수

Binder	Total-solids epoxy
Nominal Thickness	3 mm
Supported Layer Range	2-4 mm
Aggregate	Graded mineral filler
Surface	Dense smooth gloss
Mixed Density	Approximately 1.79 kg/L at 25 °C
Material Consumption	Approximately 1.8 kg/m² per mm
Base Preparation	Mechanically prepared, primed concrete
Application Temperature	10-30 °C
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Consider QF30 for internal distribution aisles, packaging rooms and clean manufacturing floors carrying frequent wheeled traffic. Floor loading still depends on the supporting slab and wheel contact area; a thicker resin overlay does not repair structurally weak concrete beneath it.

Solutions for Your Application

Wear tends to concentrate in a narrow trolley track.

Maintain the specified aggregate-filled depth through that route and avoid feathering the wearing layer.

An old slab contains ridges that would reduce local coating thickness.

Grind high spots and repair depressions before setting the finished overlay level.

사용 가능한 옵션

Select the required shade and nominal build within the supported range. Add compatible cove returns where wall cleaning is necessary, with transitions planned for doors and existing drainage.

Planning a Epoxy Self-Leveling Flooring 3 mm Quartz-Filled specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.