Longer contact path
The 50 mm bed increases adsorbent depth over the slim panel, improving capacity for moderate molecular loading.
The 500 x 600 x 50 mm version increases both face width and adsorbent depth compared with the slim half panel. Its rated duty of 300 m3/h at 60 Pa provides a practical balance for moderate odor or gas loads in supply, recirculation or exhaust sections. Carbon, impregnated carbon or impregnated activated alumina should be selected against the actual contaminant chemistry.
The 50 mm bed increases adsorbent depth over the slim panel, improving capacity for moderate molecular loading.
A 500 mm face fits air handlers that fall between half-module and full-square rack layouts.
Available adsorbent families allow the panel to target general VOCs, odors or selected reactive gases.
| Dimensions | 500 x 600 x 50 mm |
|---|---|
| Rated Airflow | 300 m3/h |
| Initial Pressure Drop | 60 Pa |
| Adsorbent Media | Activated carbon, impregnated carbon or impregnated activated alumina |
| Frame Material | Galvanized steel or stainless steel |
| Bed Configuration | Loose-fill molecular panel |
| Maximum Operating Temperature | 80 C |
| Maximum Relative Humidity | 90% RH |
| Installation Access | Front or side access |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
Used in moderate-duty make-up air, recirculation and exhaust systems serving laboratories, clean-support rooms or industrial processes. It should be preceded by suitable particulate filtration so dust does not mask the adsorbent surface.
Define target contaminants, adsorbent formulation, frame metal, particle-control layer, access side and replacement-monitoring approach.
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.