STjh compact 3 foot aseptic laminar workstation with welded cabinet, HEPA downflow and stainless work zone

STJH-ASEPTIC-LAMINAR-WORKSTATION-3FT

Aseptic Laminar Flow Workstation 3 ft

A compact self-contained sterility module for one non-hazardous IV, syringe or sample-preparation station.

35 in compact cabinet width
540 CFM at 90 fpm
Stainless ISO Class 5 work zone

견적 요청 제품 찾아보기

상품 소개

The three-foot module uses a 35 x 24.25 x 28 in published cabinet envelope and provides a 33.5 in working dimension. At 90 fpm it delivers approximately 540 CFM through an aerosol-challenged 99.99% HEPA filter. A welded steel cabinet surrounds the stainless work area, creating an ISO Class 5 product-protection zone for compact aseptic tasks.

주요 기능

Small aseptic footprint

The three-foot size supports one critical preparation task without consuming a standard four-foot bench bay.

Obstacle-sweeping airflow

The combined vertical and horizontal pattern is designed to reduce reverse turbulence around work items.

Cleanable working interior

A stainless work zone sits within the welded cabinet for routine wipe-down.

기술 매개변수

Published Dimensions A/B/C	35 x 24.25 x 28 in
Published Dimension E	33.5 in
Average Airflow	540 CFM at 90 fpm
Final Filter	HEPA, 99.99% at 0.3 µm
Work-Zone Condition	ISO Class 5
Electrical Supply	115 V, 60 Hz, 6.0 A
Heat Load	1000 BTU/h
Shipping Weight	265 lb
Construction	Welded steel with stainless work area
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

For small IV admixture, syringe filling and critical non-hazardous sample preparation. Positive-pressure clean benches protect the product but do not contain hazardous aerosols for the operator or room.

Solutions for Your Application

A four-foot sterility module is too wide for a compact pharmacy bay.Use the 35 in cabinet while keeping the process inside the 33.5 in work dimension.

Operators may use the positive-pressure bench for hazardous preparations.Restrict use to non-hazardous materials and choose containment equipment for hazardous aerosols.

사용 가능한 옵션

Configure work-surface fittings, lighting, electrical connection and support base. Process fixtures should be positioned to preserve the designed airflow around obstructions.

Planning a Aseptic Laminar Flow Workstation 3 ft specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.