Sterilize-in-place system three-quarter view with steam separator and four-branch manifold

클린룸 유틸리티 시스템

Sterilize - in - place 시스템

A monitored clean-steam distribution skid that sequences steam admission, air removal, hold time and condensate discharge across connected hygienic process circuits.

Sequenced clean-steam admission
Drainable condensate management
Multi-point temperature monitoring

견적 요청 제품 찾아보기

상품 소개

The Sterilize-in-Place System receives qualified clean steam, separates entrained condensate and routes steam through an automated hygienic valve manifold to connected vessels, piping or filling circuits. Pressure, drain and temperature instruments support controlled air displacement, exposure and cooling phases without dismantling the process path.

주요 기능

Polished 316L clean-steam contact path

Vertical inlet separator

Automated multi-branch valve manifold

Low-point thermostatic condensate removal

Independent branch temperature inputs

Pressure indication and regulation interface

Recipe-based sterilization sequencing

HMI alarms and phase status

응용 프로그램 솔루션

Effective SIP depends on removing air and condensate, exposing every wetted surface to the selected condition and documenting stable hold points without damaging seals or instruments.

Cold pockets form behind retained condensateProvide sloped branches and dedicated hygienic traps at verified low points before starting the exposure hold.

Parallel circuits heat at different ratesSequence branch valves and monitor representative return temperatures independently.

Steam pressure varies during valve changesCoordinate inlet pressure control with staged branch admission and live pressure indication.

Operators cannot distinguish exposure from coolingUse recipe phases, permissives and alarms to separate air purge, heat-up, hold, depressurization and cooling.

일반적인 응용 프로그램

Bioreactor and fermenter circuitsSterile transfer pipingAseptic filling product pathsPharmaceutical process vesselsHygienic filtration housings

기술 매개변수

Branch count, steam demand, valve sizing, trap capacity, temperature inputs and sequencing logic are selected for the connected equipment and approved sterilization cycle.

핵심 재료	316L stainless steel clean-steam separator, header and hygienic branch piping
패널 두께	Separator shell typically 2.0–5.0 mm
유효 폭	Skid width typically 900–2200 mm
최대 길이	Complete skid length typically up to 3500 mm
강철 면면 두께	컨트롤 인클로저 및 스키드 시트 일반적으로 1.5-3.0mm
코어 밀도	316L 스테인리스 밀도 대략 8000 kg/m³
열전도도 (Thermal Conductivity)	316L 스테인리스 주위 온도에서 대략 15 W/(m · K)
표면 마무리	Polished clean-steam surfaces with satin-finished skid and control enclosure
접합 유형	Orbital-welded hygienic header with sanitary clamps at valves, instruments and condensate trap
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Two to eight sterilization branchesSteam pressure-reducing stationBranch return-temperature sensorsHygienic thermostatic steam trapsSterile-air cooling interfaceRecipe and batch-report communicationInsulated steam piping

Planning a Sterilize-in-Place System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.